| 引用本文: | 潘毅,陈侠辉,王涵平,赵崇锦.无黏结预应力装配式框架结构地震易损性分析[J].哈尔滨工业大学学报,2018,50(6):71.DOI:10.11918/j.issn.0367-6234.201709017 |
| PAN Yi,CHEN Xiahui,WANG Hanping,ZHAO Chongjin.Seismic fragility analysis of unbonded post-tensioned fabricated RC frame structures[J].Journal of Harbin Institute of Technology,2018,50(6):71.DOI:10.11918/j.issn.0367-6234.201709017 |
|
| 本文已被：浏览 2185次 下载 1595次 |
码上扫一扫！ |
|
|
| 无黏结预应力装配式框架结构地震易损性分析 |
|
潘毅1,2,陈侠辉1,王涵平1,3,赵崇锦1
|
|
(1.西南交通大学 土木工程学院,成都 610031;2.抗震工程技术四川省重点实验室(西南交通大学),成都 610031; 3.中铁第六勘察设计院集团有限公司,天津 300308)
|
|
| 摘要: |
| 为研究无黏结预应力装配式框架结构的抗震性能，首先采用有限元软件OpenSEES中的梁柱节点单元模拟无黏结预应力梁柱节点，并与试验结果进行验证.然后，按照场地条件选取18条地震动记录，以预应力筋屈服和最大层间位移角作为结构的损伤指标，建立地震需求模型.最后，采用IDA方法对一栋6层无黏结预应力装配式框架结构和现浇框架结构进行易损性分析，得到两种结构的IDA曲线和易损性曲线.研究结果表明:在水平地震作用下，柱截面尺寸和配筋相同、梁截面尺寸和受弯承载力相同时，在防止倒塌性态点处，装配式结构的最大层间位移角和地震动强度指标均小于现浇结构; 当地震动强度较小时，装配式框架结构和现浇框架结构的抗倒塌能力接近，但随着地震动强度的增大，在防止倒塌性态点处，装配式框架结构的抗倒塌能力比现浇框架结构弱.
|
| 关键词: 预应力 装配式框架 梁柱节点 增量动力分析（IDA） 地震易损性 |
| DOI：10.11918/j.issn.0367-6234.201709017 |
| 分类号:TU375；TU378 |
| 文献标识码:A |
| 基金项目:国家重点研发计划(2016YFC0802205)； 国家自然科学基金(51608073) |
|
| Seismic fragility analysis of unbonded post-tensioned fabricated RC frame structures |
|
PAN Yi1,2,CHEN Xiahui1,WANG Hanping1,3,ZHAO Chongjin1
|
|
(1.School of Civil Engineering, Southwest Jiaotong University, Chengdu 610031, China; 2. Key Laboratory of Seismic Engineering of Sichuan Province (Southwest Jiaotong University), Chengdu 610031, China; 3. China Railway Liuyuan Group Co., Ltd., Tianjin 300308, China)
|
| Abstract: |
| To investigate the seismic performance of unbonded fabricated frame, a numerical model of the beam-column connection was built in OpenSEES. The comparison between test results and numerical analysis proved the effectiveness of the numerical model. Eighteen different ground motions were employed in the seismic fragility analysis according to the site conditions. The maximum story drift and tensile force in prestress strands were chosen as the damage indexes. Through IDA analysis for two 6-story frame structures, i.e. the common RC frame and unbonded fabricated frame, the IDA curves and fragility curves were obtained. According to the analysis, the unbonded fabricated frame can sustain ground motion record with smaller intensity index than the common RC frame with the same configurations, i.e. the cross-section of column, reinforcement ratio etc. Under small earthquake, the two frame structures present similar performance, while under strong earthquake, the collapse resistance performance of common RC frame is better than that of the unbounded fabricated frame.
|
| Key words: prestressed fabricated RC frame beam-column connection incremental dynamic analysis (IDA) seismic fragility |
