期刊检索

  • 2024年第56卷
  • 2023年第55卷
  • 2022年第54卷
  • 2021年第53卷
  • 2020年第52卷
  • 2019年第51卷
  • 2018年第50卷
  • 2017年第49卷
  • 2016年第48卷
  • 2015年第47卷
  • 2014年第46卷
  • 2013年第45卷
  • 2012年第44卷
  • 2011年第43卷
  • 2010年第42卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 哈尔滨工业大学 主编 李隆球 国际刊号ISSN 0367-6234 国内刊号CN 23-1235/T

期刊网站二维码
微信公众号二维码
引用本文:任秉银,梁兆东,孔民秀.机械手空间圆弧位姿轨迹规划算法的实现[J].哈尔滨工业大学学报,2012,44(7):27.DOI:10.11918/j.issn.0367-6234.2012.07.005
REN Bing-yin,LIANG Zhao-dong,KONG Min-xiu.An algorithm for the interpolation of circular trajectories of manipulators[J].Journal of Harbin Institute of Technology,2012,44(7):27.DOI:10.11918/j.issn.0367-6234.2012.07.005
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
过刊浏览    高级检索
本文已被:浏览 5638次   下载 3892 本文二维码信息
码上扫一扫!
分享到: 微信 更多
机械手空间圆弧位姿轨迹规划算法的实现
任秉银, 梁兆东, 孔民秀
哈尔滨工业大学 机电工程学院, 150001 哈尔滨
摘要:
为提高机械手的空间圆弧作业任务的轨迹精度,提出采用齐次矩阵和四元数法分别进行位置和姿态的轨迹规划方法.对于位置规划,先对空间圆弧所在平面的圆心角做归一化处理,再按照平滑角速度曲线规划位置轨迹上的插值点,并用齐次矩阵表示插补点的位置,保证了插补点的位置始终在所求圆弧上.姿态规划采用四元数圆弧曲线函数以及分段三次有理插值保形样条函数实现C2连续的姿态轨迹.算例验证表明,提出的位姿规划方法能够保证机械手末端执行器的轨迹精度,在位置精度及姿态平稳过渡有较高要求的机械手的实际应用方面有推广价值.
关键词:  机械手  空间圆弧  位置轨迹规划;姿态轨迹规划  四元数曲线
DOI:10.11918/j.issn.0367-6234.2012.07.005
分类号:TP242
基金项目:国家科技重大专项资助项目(2011ZX04013-012).
An algorithm for the interpolation of circular trajectories of manipulators
REN Bing-yin, LIANG Zhao-dong, KONG Min-xiu
School of Mechatronics Engineering, Harbin Institute of Technology, 150001 Harbin, China
Abstract:
To improve the arc trajectory planning accuracy of manipulators passing the non-collinear three-points, a new approach for the manipulators’ position planning and orientation planning is presented by using homogeneous matrix and quaternion respectively. For the position planning, the central angle of the arc in space is normalized, the positions of interpolation points are planed according to the smooth angular velocity curve and represented by homogeneous matrix, all the interpolation points are on the demanded arc. By using circular blending quaternion curve and a piecewise rational cubic spline together, a C2 continuous orientation path which smoothly interpolates the given sequence of the manipulators positions is obtained. Simulation example shows that the presented planning approach for position and orientation can guarantee the end trajectory precision of manipulator, and can be applied to the trajectory planning of the manipulators with high accuracy requirement.
Key words:  manipulator  arc in space  position trajectory planning  orientation trajectory planning  quaternion curves

友情链接LINKS