首页 | 官方网站   微博 | 高级检索  
     

气体放电加工机理分析
引用本文:李立青,王振龙,赵万生.气体放电加工机理分析[J].哈尔滨工业大学学报,2004,36(3):359-362.
作者姓名:李立青  王振龙  赵万生
作者单位:哈尔滨工业大学,机电工程学院,黑龙江,哈尔滨,150001
摘    要:为了从机理上了解以气体为介质的放电加工,进行了气体中放电加工的基本工艺实验,通过实验现象和数据分析,并结合气体放电理论,从电子的碰撞电离、介质的击穿、放电通道的形成以及放电通道的扩展等角度对以气体为介质的放电加工机理进行了分析。结果表明:气体介质放电加工,介质击穿以电子的轰击碰撞为主;放电通道是由电子雪崩发展成的流光而形成的;同传统电火花加工相比,气体介质的放电加工形成的放电通道扩展迅速;气体放电加工存在极性效应,正极性加工时加工速度较快,电极损耗极低.分析了气体放电加工应在有一定压力的气体介质中进行的原因。

关 键 词:电火花加工  气体放电加工  碰撞电离  放电通道
文章编号:0367-6234(2004)03-0359-04
修稿时间:2003年3月10日

Mechanism analysis of electrical discharge machining in gas
LI Li-qing,WANG Zhen-long,ZHAO Wan-sheng.Mechanism analysis of electrical discharge machining in gas[J].Journal of Harbin Institute of Technology,2004,36(3):359-362.
Authors:LI Li-qing  WANG Zhen-long  ZHAO Wan-sheng
Abstract:The EDM mechanism is analyzed from the view points of electrodes collision and ionization, break-down of gas medium; formation of discharge passage and expansion of discharge passage. It is suggested that e-lectrons play a significant role in the course of collision and ionization; passage is formed by streamer developed by electron avalanche; polarity effect is found in dry EDM, the material removed rate (MRR) is higher and tool relative wear ratio ( RWR) is lower when the workpiece is connected with the anode than the cathode in dry -EDM. In comparison with traditional EDM, the discharge passages formed in gas medium expand more quickly and the reason why dry - EDM should be processed in gas under a certain pressure is also analyzed.
Keywords:EDM  EDM in gas (drv EDM)  mechanism analvze
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号