| 等螺旋角铣刀二轴联动数控加工方案及其几何模型 |
| |
| 引用本文： | 唐余勇,陈朝光.等螺旋角铣刀二轴联动数控加工方案及其几何模型[J].哈尔滨工业大学学报,1996,28(5):5-7. |
| |
| 作者姓名： | 唐余勇 陈朝光 |
| |
| 作者单位： | [1]数学系 [2]成功大学 |
| |
| 摘 要： | 采用回转面上斜驶线给出了二轴联动数控加工方案及其相应的几何模型，并用锥面螺旋铣刀的实验验证了所提方案与模型。
|
| 关 键 词： | 螺旋铣刀 数控加工 二轴联动 铣刀 几何模型 |
The Numerical Control Scheme of the Equally Spiral Angular Milling Cutler in Two Simultaneously Moving Axes Space and Its Geometrical Pattern |
| |
| Taug Yhyong,Chen Chaoguang,Wang Song.The Numerical Control Scheme of the Equally Spiral Angular Milling Cutler in Two Simultaneously Moving Axes Space and Its Geometrical Pattern[J].Journal of Harbin Institute of Technology,1996,28(5):5-7. |
| |
| Authors: | Taug Yhyong Chen Chaoguang Wang Song |
| |
| Affiliation: | Dept. of Mathematics |
| |
| Abstract: | The numerical control processing scheme in a two simultaneously moving axes space and its corresponding geometrical pattern are presented. Experiment was conducted with a slant trace on the rotary face. The scheme and model given in this paper we re tested and verified by the above example. |
| |
| Keywords: | Spiral culter mathematical model numerical control |
| 本文献已被 CNKI 维普 等数据库收录！ |
