期刊检索

  • 2024年第56卷
  • 2023年第55卷
  • 2022年第54卷
  • 2021年第53卷
  • 2020年第52卷
  • 2019年第51卷
  • 2018年第50卷
  • 2017年第49卷
  • 2016年第48卷
  • 2015年第47卷
  • 2014年第46卷
  • 2013年第45卷
  • 2012年第44卷
  • 2011年第43卷
  • 2010年第42卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 哈尔滨工业大学 主编 李隆球 国际刊号ISSN 0367-6234 国内刊号CN 23-1235/T

期刊网站二维码
微信公众号二维码
引用本文:周益君,关富玲.考虑杆件弹性和三维间隙铰机构动力学研究[J].哈尔滨工业大学学报,2012,44(10):122.DOI:10.11918/j.issn.0367-6234.2012.10.025
ZHOU Yi-jun,GUAN Fu-ling.Dynamics analysis of mechanisms with elastic bars and three-dimensional clearance revolute joints[J].Journal of Harbin Institute of Technology,2012,44(10):122.DOI:10.11918/j.issn.0367-6234.2012.10.025
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
过刊浏览    高级检索
本文已被:浏览 2400次   下载 1659 本文二维码信息
码上扫一扫!
分享到: 微信 更多
考虑杆件弹性和三维间隙铰机构动力学研究
周益君, 关富玲
浙江大学 建筑工程学院, 310058 杭州
摘要:
为了能准确预测太空中可展机构的展开性能,在动力学模型中同时考虑杆件弹性和三维间隙铰的影响.间隙铰通过“T”字形杆件模拟,接触力采用非线性弹簧阻尼模型,分别考虑理想铰、三维间隙铰以及杆件弹性3种情况对可展桁架的一个单元进行展开过程数值仿真分析.设计了一个桁架单元装置,通过实验初步验证杆件弹性和间隙铰对机构动力学的非线性影响.分析结果表明间隙铰中存在径向和轴向碰撞接触力,轴向碰撞接触力影响桁架平面外稳定性,杆件弹性振动效应使能量发生转移,减小了最大碰撞接触力,加剧了轴套和销轴之间的碰撞接触次数.
关键词:  弹性变形  三维间隙铰  可展机构  动力学  仿真  实验
DOI:10.11918/j.issn.0367-6234.2012.10.025
分类号:TH113.2
基金项目:载人航天领域预先研究项目(030103).
Dynamics analysis of mechanisms with elastic bars and three-dimensional clearance revolute joints
ZHOU Yi-jun, GUAN Fu-ling
College of Civil Engineering and Architecture, Zhejiang University, 310058 Hangzhou, China
Abstract:
The influences of elastic bar and three-dimensional revolute joint are considered in the dynamic model to accurately predict the deployment performance of space deployable structure. The clearance joint was simplified by “T” shaped bars and the contact force was adopted by a nonlinear elastic-damper model. The deployment process of a truss unit was simulated with the ideal joint, three-dimensional clearance joint or the elastic bar. A corresponding device was designed, the correctness of theoretical analysis was verified by the experimental result, and the dynamic nonlinear performance of truss was affected. The simulation results show that not only the radial impact contact force, but also the axial contact force exist in the clearance joint, which affect the stability out of the truss plane. Because of the elastic vibration effects of bars, energy transfer occurs, the maximum contact force is reduced, and the number of contacts between the journal and bearing is increased.
Key words:  elastic deformation  three-dimensional revolute clearance joint  deployable structure  dynamics  simulation  experiment

友情链接LINKS