| 关于硬质合金插齿刀新设计模型研究 |
| |
| 引用本文： | 唐余勇,金建涛.关于硬质合金插齿刀新设计模型研究[J].哈尔滨工业大学学报,1992,24(3):103-106. |
| |
| 作者姓名： | 唐余勇 金建涛 |
| |
| 作者单位： | 哈尔滨工业大学数学系
(唐余勇)，哈尔滨工业大学数学系(金建涛) |
| |
| 基金项目： | Supported by Scienee Foundation of Heilongjiang Province |
| |
| 摘 要： | 0 Introduction The ordinary gear shaper tools can be designed in traditional method. The detailed discussion is given in 1]. As for ordinary gear shaper cutters, due to their small rake angles, they may be designed approximately by modifying their tooth profile angles. But for carbide ones, too small absolute value of rake angle is liable to cause breaking, while too large one results in excess design error. For this reason, we provide
|
| 关 键 词： | 硬质合金 插齿刀 数学模型 |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
