| Author Name | Affiliation | | LI Yun-liang | School of Transportation Science and Engineering,Harbin Institute of Technology,Harbin 150090,China
Post-doctoral Research Center in Civil Engineering,Harbin Institute of Technology,Harbin 150001,China | | LU Ming-yu | Dept. of Mechanical Engineering,Hong Kong Polytechnic University,Hong Kong,China | | TAN Hui-feng | Center for Composite Materials,Harbin Institute of Technology,Harbin 150001,China | | TAN Yi-qiu | School of Transportation Science and Engineering,Harbin Institute of Technology,Harbin 150090,China |
|
| Abstract: |
| Wrinkling patterns and the rules of wrinkling formation and expansion were analyzed in this paper. Direct disturbing method,a numerical method for membrane wrinkling analysis,was established based on finite element programme. The experimental results using photogrammetric procedure were compared with numerical analysis results. It is shown that the reasonable wrinkling deformation can be obtained by rational mesh density and timely removes the initial flaw during analysis. Wrinkles firstly appear on the left and right sides then extend to the membrane center,and the wrinkling amplitude increases with shear displacement. Results from both of the experiments and numerical analysis have a good agreement,which verifies the rationality of the numerical analysis method. |
| Key words: membrane wrinkle numerical analysis photogrammetric procedure |
| DOI：10.11916/j.issn.1005-9113.2010.02.016 |
| Clc Number:O484.2 |
| Fund: |
