Please submit manuscripts in either of the following two submission systems

    ScholarOne Manuscripts

  • ScholarOne
  • 勤云稿件系统

  • 登录

Search by Issue

  • 2024 Vol.31
  • 2023 Vol.30
  • 2022 Vol.29
  • 2021 Vol.28
  • 2020 Vol.27
  • 2019 Vol.26
  • 2018 Vol.25
  • 2017 Vol.24
  • 2016 vol.23
  • 2015 vol.22
  • 2014 vol.21
  • 2013 vol.20
  • 2012 vol.19
  • 2011 vol.18
  • 2010 vol.17
  • 2009 vol.16
  • No.1
  • No.2

Supervised by Ministry of Industry and Information Technology of The People's Republic of China Sponsored by Harbin Institute of Technology Editor-in-chief Yu Zhou ISSNISSN 1005-9113 CNCN 23-1378/T

期刊网站二维码
微信公众号二维码
Related citation:CHEN Wei-shan,LIU Ying-xiang,LIU Jun-kao,SHI Sheng-jun.Working principle and design of a double cylinders type traveling wave ultrasonic motor using composite transducer[J].Journal of Harbin Institute Of Technology(New Series),2011,18(2):28-32.DOI:10.11916/j.issn.1005-9113.2011.02.006.
【Print】   【HTML】   【PDF download】   View/Add Comment  Download reader   Close
←Previous|Next→ Back Issue    Advanced Search
This paper has been: browsed 821times   downloaded 469times 本文二维码信息
码上扫一扫!
Shared by: Wechat More
Working principle and design of a double cylinders type traveling wave ultrasonic motor using composite transducer
Author NameAffiliation
CHEN Wei-shan State Key Laboratory of Robotics and System,Harbin Institute of Technology,Harbin 150001,China 
LIU Ying-xiang State Key Laboratory of Robotics and System,Harbin Institute of Technology,Harbin 150001,China 
LIU Jun-kao State Key Laboratory of Robotics and System,Harbin Institute of Technology,Harbin 150001,China 
SHI Sheng-jun State Key Laboratory of Robotics and System,Harbin Institute of Technology,Harbin 150001,China 
Abstract:
A double cylinders type traveling wave ultrasonic motor using composite transducer was proposed.The proposed stator contained two cylinders and one composite transducer,and the transducer located on the outer surfaces of cylinders.The composite transducer included two exponential horns located on leading ends,and the horns insected with the cylinders at tip ends.Two degenerated flexural vibration modes spatially and temporally orthogonal to each other were excited in each cylinder by the composite transducer.In this new design,a single transducer could excite two flexural traveling waves in the cylinders.Thus,elliptical motions were achieved at the particles on the teeth.The working principle of the proposed motor was analyzed.The cylinder and transducer were designed with FEM.The resonant frequencies of two vibration modals of the stator were tuned to be the same,and the motion trajectories of nodes on the teeth were analyzed.Transient analysis results show that the motion trajectories of teeth are ellipses.The results of this paper can guide the development of this new type of ultrasonic motor.
Key words:  ultrasonic motor  traveling wave  double cylinders  composite transducer  FEM
DOI:10.11916/j.issn.1005-9113.2011.02.006
Clc Number:TP212
Fund:

LINKS