Please submit manuscripts in either of the following two submission systems

    ScholarOne Manuscripts

  • ScholarOne

    • 勤云稿件系统

  • 登录

Search by Issue

  • 2024 Vol.31
  • 2023 Vol.30
  • 2022 Vol.29
  • 2021 Vol.28
  • 2020 Vol.27
  • 2019 Vol.26
  • 2018 Vol.25
  • 2017 Vol.24
  • 2016 vol.23
  • 2015 vol.22
  • 2014 vol.21
  • 2013 vol.20
  • 2012 vol.19
  • 2011 vol.18
  • 2010 vol.17
  • 2009 vol.16
  • No.1
  • No.2

Search by Keywords

  • Search by Title
  • Search by Keywords
  • Search by Abstract
  • Search by Author's Chinese Name
  • Search by Author's English Name
  • Search by Fund

News & AnnouncementMORE

Supervised by Ministry of Industry and Information Technology of The People's Republic of China Sponsored by Harbin Institute of Technology Editor-in-chief Yu Zhou ISSNISSN 1005-9113 CNCN 23-1378/T

期刊网站二维码
微信公众号二维码
Related citation:WEN Tong,CHEN Xia.Investigation of guided external inversion of thin-walled round tube[J].Journal of Harbin Institute Of Technology(New Series),2012,19(3):38-42.DOI:10.11916/j.issn.1005-9113.2012.03.007.
【Print】   【HTML】   【PDF download】   【View/Add Comment】  【Download reader】  【 Close 】
←Previous|Next→ Back Issue    Advanced Search
This paper has been: browsed 1658times   downloaded 990times 本文二维码信息
码上扫一扫！
Shared by: Wechat More
Font:larger+|default|smaller-
Investigation of guided external inversion of thin-walled round tube
Author NameAffiliation
WEN Tong College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China 
CHEN Xia College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China 
Abstract:
A new tube inversion method called guided tube inversion (GTI), which is based on traditional axial compression inversion, has been put forward. Computational and experimental studies of the guided external inversion of round tubes are presented. The main features of the deformation and the effects of key parameters on the forming process were discussed. Numerical and experimental results both indicated that the double-walled tubular parts made by the new method have a much higher quality than those made by traditional methods, as long as the proper parameters of the process were utilized. It was found that the die radius r, the inner diameter D of the guiding ring, the velocity V of the guiding system, and the surface friction between tube and guiding ring, play important roles in the inverting process.
Key words:  tube  inversion  forming  finite element method
DOI：10.11916/j.issn.1005-9113.2012.03.007
Clc Number:TG3
Fund:

LINKS

Copyright © The Editorial Department of Journal of Harbin Institute of Technology
Address: 92 West Dazhi Street, Nan Gang District, Harbin, Heilongjiang Province, China Postcode: 150001
(C)2015 JOURNAL OF HIT ALL RIGHTS RESERVED. ICP. 0000423255