Please submit manuscripts in either of the following two submission systems

    ScholarOne Manuscripts

  • ScholarOne
  • 勤云稿件系统

  • 登录

Search by Issue

  • 2024 Vol.31
  • 2023 Vol.30
  • 2022 Vol.29
  • 2021 Vol.28
  • 2020 Vol.27
  • 2019 Vol.26
  • 2018 Vol.25
  • 2017 Vol.24
  • 2016 vol.23
  • 2015 vol.22
  • 2014 vol.21
  • 2013 vol.20
  • 2012 vol.19
  • 2011 vol.18
  • 2010 vol.17
  • 2009 vol.16
  • No.1
  • No.2

Supervised by Ministry of Industry and Information Technology of The People's Republic of China Sponsored by Harbin Institute of Technology Editor-in-chief Yu Zhou ISSNISSN 1005-9113 CNCN 23-1378/T

期刊网站二维码
微信公众号二维码
Related citation:Zhaoxin Hou,Guohong Huang,Chao Gong.Prying Force Calculation and Design Method for T-shaped Tensile Connector with High Strength Bolt[J].Journal of Harbin Institute Of Technology(New Series),2015,22(2):103-107.DOI:10.11916/j.issn.1005-9113.2015.02.015.
【Print】   【HTML】   【PDF download】   View/Add Comment  Download reader   Close
←Previous|Next→ Back Issue    Advanced Search
This paper has been: browsed 4953times   downloaded 10322times 本文二维码信息
码上扫一扫!
Shared by: Wechat More
Prying Force Calculation and Design Method for T-shaped Tensile Connector with High Strength Bolt
Author NameAffiliation
Zhaoxin Hou College of Civil Engineering, Tongji University, Shanghai 200092, China
Central Research Institute of Building and Construction,MCC Group,Co., Ltd., Beijing 100088,China 
Guohong Huang Central Research Institute of Building and Construction,MCC Group,Co., Ltd., Beijing 100088,China 
Chao Gong Central Research Institute of Building and Construction,MCC Group,Co., Ltd., Beijing 100088,China
National Engineering Research Center for Steel Construction, Beijing 100088,China 
Abstract:
In order to establish the design method for T-shaped tensile connector with high strength bolt, the theoretical analysis is carried out. Firstly, it analyzes the performance of the connector and establishes prying force calculation model. Based on the model, prying force equation and function between bolt prying force and flange thickness is derived, and the min and max thickness requirement of flange plate under a certain tension load is then obtained. Finally, two simplified design methods of the connector are proposed, which are bolt pulling capacity method and flange plate bending capacity method.
Key words:  prying force  T-type joints  high strength bolts  flange thickness
DOI:10.11916/j.issn.1005-9113.2015.02.015
Clc Number:TU391
Fund:

LINKS