| 引用本文: | 李陌,李言成,王清,董闯,QURASHI Muhammad Saqlain,赵亚军,张爽,李瑛,王连超,万鹏.基于团簇式的GH2132高温合金成分协同变化关系[J].材料科学与工艺,2022,30(6):1-9.DOI:10.11951/j.issn.1005-0299.20220031. |
| LI Mo,LI Yancheng,WANG Qing,DONG Chuang,QURASHI Muhammad Saqlain,ZHAO Yajun,ZHANG Shuang,LI Ying,WANG Lianchao,WAN Peng.Coordinated composition change based on cluster formula for superalloy GH2132[J].Materials Science and Technology,2022,30(6):1-9.DOI:10.11951/j.issn.1005-0299.20220031. |
|
| |
|
|
| 本文已被：浏览 706次 下载 280次 |
码上扫一扫！ |
|
|
| 基于团簇式的GH2132高温合金成分协同变化关系 |
|
李陌1,李言成1,王清1,董闯1,2,QURASHI Muhammad Saqlain2, 赵亚军2, 张爽2, 李瑛3, 王连超3,万鹏4
|
|
(1.三束材料改性教育部重点实验室(大连理工大学),辽宁 大连 116024;2.大连交通大学 材料科学与工程学院,辽宁 大连 116028; 3.东北特殊钢集团股份有限公司, 辽宁 大连 116105;4.佛山市顺德区美的电热电器制造有限公司, 广东 佛山 528300)
|
|
| 摘要: |
| GH2132(A286)是析出强化型铁基高温合金,其含有多种合金化元素,为避免不合适的成分选择导致的综合性能失配,通过重点分析东北特钢提供的产品成分,解析国标成分区间的合理性,本文提出了一个更加合适的新成分标准形式。为此,引入“团簇加连接原子”结构模型,该模型将合金成分的结构载体表述为［中心-第一近邻］(连接原子)的团簇成分式形式。首先将合金化元素分为基体Fe、稳定奥氏体的(Ni,Mn)、稳定铁素体的(Cr,Mo,V,Si,Ti,Al)、以及不进入团簇式的(C,P,S,B)。通过分析国标规定的成分区间和实际合金成分,指出合金的实际成分区间远小于国标范围,并由16原子的成分式限定:Fe(8.5~9.0)±0.25(Ni,Mn)4±0.25(Cr,Mo,V,Si,Ti,Al)3~3.5。进而揭示了同类元素内部的质量百分比协同变化关系,即24.6≤Ni+Mn ≤28.0和17.4≤Cr+0.6Mo+V+1.7Si+1.1Ti+1.8Al≤20.4。由此更合理地限定Mn、Si元素成分区间,并对东北特钢的合金成分提供了改进建议。 |
| 关键词: GH2132合金 团簇加连接原子模型 团簇式 成分标准 协同变化关系 |
| DOI：10.11951/j.issn.1005-0299.20220031 |
| 分类号:TG132.3+2 |
| 文献标识码:A |
| 基金项目:大连市科技创新基金重点学科(研究方向)重大课题项目(2020JJ25CY004)；顺德区科技计划项目(201911220001). |
|
| Coordinated composition change based on cluster formula for superalloy GH2132 |
|
LI Mo1, LI Yancheng1, WANG Qing1, DONG Chuang1,2, QURASHI Muhammad Saqlain2, ZHAO Yajun2, ZHANG Shuang2, LI Ying3, WANG Lianchao3, WAN Peng4
|
|
(1.Key Laboratory of Materials Modification by Laser, Ion and Electron Beams (Dalian University of Technology), Ministry of Education, Dalian 116024, China; 2.School of Materials Science and Engineering, Dalian Jiaotong University, Dalian 116028, China; 3.Dongbei Special Steel Group Co., Ltd., Dalian 116105, China; 4.Foshan Shunde Midea Electro-Thermal Appliances Manufacturing Co., Ltd., Foshan 528300, China)
|
| Abstract: |
| GH2132(A286) is an iron-based superalloy reinforced with γ′-Ni3(Ti, Al) phase,which contains multiple alloying elements.By investigating the composition of the product provided by Dongbei Special Steel Group and analyzing the reasonableness of the composition range in the international standard, this paper proposes a new composition standard form, aiming at avoiding the comprehensive performance mismatch caused by an inappropriate choice of composition. The “cluster-plus-glue-atom” model was employed,which identifies the structural carrier of the alloy composition and expresses as cluster formula ［center-nearest neighbors］(glue atoms). The alloying elements were first divided into matrix Fe, austenite stabilizers (Ni, Mn), ferrite stabilizers (Cr, Mo, V, Si, Ti, Al), and those that do not enter the cluster formula (C,P,S,B). By analyzing the elemental ranges specified in the international standard and the composition of some real alloys, it was pointed out that the actual composition range was far smaller than the international standard range, and was specified by 16-atom composition formula: Fe(8.5~9.0)±0.25(Ni,Mn)4±0.25(Cr,Mo,V,Si,Ti,Al)3~3.5. Then,the coordinated changes in weight percent within each classified element were unveiled: 24.6≤Ni+Mn ≤28.0 and 17.4≤Cr+0.6Mo+V+1.7Si+1.1Ti+1.8Al≤20.4. Thus, the composition ranges of Mn and Si were redefined, and suggestions were given to improve the product composition of Dongbei Special Steel Group. |
| Key words: GH2132 superalloy cluster-plus-glue-atom model cluster formula composition standard coordinated change |
|
|
|
|
