期刊检索

  • 2024年第32卷
  • 2023年第31卷
  • 2022年第30卷
  • 2021年第29卷
  • 2020年第28卷
  • 2019年第27卷
  • 2018年第26卷
  • 2017年第25卷
  • 2016年第24卷
  • 2015年第23卷
  • 2014年第22卷
  • 2013年第21卷
  • 2012年第20卷
  • 2011年第19卷
  • 2010年第18卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 中国材料研究学会
哈尔滨工业大学
主编 苑世剑 国际刊号ISSN 1005-0299 国内刊号CN 23-1345/TB

期刊网站二维码
微信公众号二维码
引用本文:焦 剑,吴广力,刘 蓬,蔡 宇.低介电常数的介孔SiO2/PMMA杂化材料的研究[J].材料科学与工艺,2013,21(6):22-28.DOI:10.11951/j.issn.1005-0299.20130605.
JIAO Jian,WU Guang-li,LIU Peng,CAI Yu.Study of novel low-κ mesoporous silica/PMMA hybrid materials[J].Materials Science and Technology,2013,21(6):22-28.DOI:10.11951/j.issn.1005-0299.20130605.
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 3636次   下载 2302 本文二维码信息
码上扫一扫!
分享到: 微信 更多
低介电常数的介孔SiO2/PMMA杂化材料的研究
焦 剑,吴广力,刘 蓬,蔡 宇
(西北工业大学 理学院,西安 710129)
摘要:
为降低PMMA的介电常数,同时提高其力学性能和热性能,利用原位分散聚合法以二维六方孔结构SiO2(SBA-15)和蠕虫状孔结构SiO2(MSU-J)为填料制备了PMMA杂化材料.采用XRD、FT-IR、SEM、TEM和DSC等方法研究了杂化材料的微观形貌特征、介电常数、力学性能和热性能.结果表明:含质量分数7%有机化修饰的SBA-15或MSU-J的PMMA杂化材料介电常数由2.91分别降至2.68和2.56;且在较宽范围频率下杂化材料的介电常数稳定.这主要是由于介孔孔道储存空气(κ=1)、界面间隙及大的粒径带来的自由体积的引入降低了杂化材料的介电常数,同时也使杂化材料的力学性能和热性能得到显著提高.
关键词:  杂化材料  介孔二氧化硅  介电常数  微观结构  PMMA
DOI:10.11951/j.issn.1005-0299.20130605
分类号:
基金项目:西北工业大学研究生创业种子基金资助项目(Z2012152).
Study of novel low-κ mesoporous silica/PMMA hybrid materials
JIAO Jian, WU Guang-li, LIU Peng, CAI Yu
(Department of Applied Chemistry, Northwestern Polytechnical University, Xi’ an 710072, China)
Abstract:
To reduce the dielectric constant of PMMA, and improve the mechanical and thermal properties, mesoporous silica/PMMA hybrid materials containing dimensional hexagonal structure (SBA-15) or Wormhole structure (MSU-J) type mesoporous silica were successfully prepared via in situ polymerization. Their morphologies, dielectric constants, and thermal and mechanical properties were investigated by XRD,FT-IR,SEM,TEM and DSC. The conclusions reveal that the dielectric constants of hybrid materials can be reduced from 2.91of pure PMMA to 2.68and 2.56containing 7wt% modified SBA-15or modified MSU-J, respectively. And the mesoporous silica/PMMA also present stable dielectric constants across the wide frequency rang. The reduction of the dielectric constant is attributed to the incorporation of the air voids (κ=1) stored within the mesoporous silica, the air volume existing in the gaps between the mesoporous silica and PMMA matrix, and the free volume created by introducing large-sized domains. Moreover, the mechanical and thermal performance of hybrid material are dramatically improved.
Key words:  hybrid materials  mesoporous silica  dielectric constant  microstructure  PMMA

友情链接LINKS