期刊检索

  • 2024年第32卷
  • 2023年第31卷
  • 2022年第30卷
  • 2021年第29卷
  • 2020年第28卷
  • 2019年第27卷
  • 2018年第26卷
  • 2017年第25卷
  • 2016年第24卷
  • 2015年第23卷
  • 2014年第22卷
  • 2013年第21卷
  • 2012年第20卷
  • 2011年第19卷
  • 2010年第18卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 中国材料研究学会
哈尔滨工业大学
主编 苑世剑 国际刊号ISSN 1005-0299 国内刊号CN 23-1345/TB

期刊网站二维码
微信公众号二维码
引用本文:柯于斌,陶举洲,张 翔,王凌倩.粘结碳化硼材料中子屏蔽性能及制备工艺研究[J].材料科学与工艺,2013,21(6):29-33.DOI:10.11951/j.issn.1005-0299.20130606.
KE Yu-bin,TAO Ju-zhou,ZHANG Xiang,WANG Ling-qian.Research on neutron shielding property and preparation process of bonded B4C materials[J].Materials Science and Technology,2013,21(6):29-33.DOI:10.11951/j.issn.1005-0299.20130606.
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 4564次   下载 2502 本文二维码信息
码上扫一扫!
分享到: 微信 更多
粘结碳化硼材料中子屏蔽性能及制备工艺研究
柯于斌1, 陶举洲1, 张 翔2, 王凌倩1
(1. 中国科学院高能物理研究所, 北京100049;;2. 清华大学 工程物理系, 北京100084)
摘要:
中子准直器在中国散裂中子源(CSNS)的谱仪上起着限制束流截面与发散度的作用,准直器的结构设计中通过在中子飞行管上间隔设置B4C阻挡块可以起到阻挡、吸收屏蔽杂散中子的作用,为此研制了粘结碳化硼中子阻挡块,并对其成型工艺进行了研究,确定了成型最佳粉体尺寸、粘结剂含量和固化温度.对该中子屏蔽材料的中子衰减系数计算结果表明,波长为0.1×10-10、1×10-10和15×10-10 m中子通过该材料的线性衰减系数分别为3.42、30.4和 449.9cm-1.力学冲击和热重实验结果也表明该材料符合在CSNS谱仪中子束线屏蔽使用中的性能要求.
关键词:  中子屏蔽材料  环氧树脂  粘结碳化硼块  中子准直器  中国散裂中子源
DOI:10.11951/j.issn.1005-0299.20130606
分类号:
基金项目:中国科学院百人计划择优支持项目"脉冲中子散射关键技术及应用研究".
Research on neutron shielding property and preparation process of bonded B4C materials
KE Yu-bin1, TAO Ju-zhou1, ZHANG Xiang2, WANG Ling-qian1
(1.Institute of High Energy Physics, Chinese Academy of Science, Beijing 100049, China; ;2. Department of Engineering Physics, Tsinghua University, Beijing 100084, China)
Abstract:
Neutron Collimators used in Chinese Spallation Neutron Source (CSNS) are critical beamline components in controlling neutron beam cross section and divergence. Typical neutron collimators consist of series of B4C blocks fixed inside a vacuum flying tube that stop and absorb the undesired neutrons. In this work, a bonded B4C-epoxy composite was developed and factors of the preparation process including B4C powder size, epoxy content and curing temperature were studied and optimized for its application in neutron instrumentation. It is estimated that linear attenuation coefficients of 0.1×10-10, 1×10-10 and 15×10-10 m wavelength neutrons in this material are about 3.42,0.4and 449.9cm-1 respectively. Mechanical impact and thermal-gravimetric experiments tested and verified its applicability for neutron beamline applications.
Key words:  neutron shielding materials  epoxy resin  bonded B4C Blocks  neutron collimator  CSNS

友情链接LINKS