期刊检索

  • 2024年第32卷
  • 2023年第31卷
  • 2022年第30卷
  • 2021年第29卷
  • 2020年第28卷
  • 2019年第27卷
  • 2018年第26卷
  • 2017年第25卷
  • 2016年第24卷
  • 2015年第23卷
  • 2014年第22卷
  • 2013年第21卷
  • 2012年第20卷
  • 2011年第19卷
  • 2010年第18卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 中国材料研究学会
哈尔滨工业大学
主编 苑世剑 国际刊号ISSN 1005-0299 国内刊号CN 23-1345/TB

期刊网站二维码
微信公众号二维码
引用本文:陈辉,苟国庆,涂铭旌.喷涂工艺对Fe-Ni-B喷涂涂层组织性能的影响[J].材料科学与工艺,2010,18(1):145-148.DOI:10.11951/j.issn.1005-0299.20100132.
CHEN Hui,GOU Guo-qing,TU Ming-jing.Effect of thermal spray process on microstructure and properties of Fe-Ni-B coating[J].Materials Science and Technology,2010,18(1):145-148.DOI:10.11951/j.issn.1005-0299.20100132.
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1588次   下载 1033 本文二维码信息
码上扫一扫!
分享到: 微信 更多
喷涂工艺对Fe-Ni-B喷涂涂层组织性能的影响
陈辉1,2, 苟国庆1, 涂铭旌2
1.西南交通大学焊接研究所;2.四川大学材料学院
摘要:
采用高速火焰喷涂技术以及等离子喷涂技术制备了Fe-Ni-B涂层.利用扫描电子显微镜(SEM)、X射线荧光光谱仪(EDX)分析了粉末以及涂层的微观结构、涂层到基体的成分分布.利用X射线衍射(XRD)分析了喷涂态的涂层物相.并对涂层的结合强度及抗热震性能进行了试验研究.研究结果认为:等离子喷涂层组织更为致密,但其热喷涂涂层存在的层状结构也更加明显.熔融液滴在涂层表面的平铺效果都比较好.Fe、Ni元素的分布从涂层到基体基本成均匀分布,避免了局部元素偏析所造成的应力集中.热震后,等离子喷涂涂层中的裂纹分布细小且无规律.高速火焰喷涂涂层裂纹主要集中在涂层与基体结合部位.根据材料抗热震性能的能量理论和弹性理论,等离子喷涂涂层的抗热震能力更强.并且涂层的断裂失效主要产生在结合部位.
关键词:  高速火焰喷涂  等离子喷涂  Fe-Ni-B  能量理论  弹性理论
DOI:10.11951/j.issn.1005-0299.20100132
分类号:TG174.4
基金项目:
Effect of thermal spray process on microstructure and properties of Fe-Ni-B coating
CHEN Hui1,2, GOU Guo-qing1, TU Ming-jing2
1.Welding Research School,Southwest Jiaotong University,Chengdu 610031,China;2.School of Materials Science and Engineering,Sichuan University,Chengdu 610041,China
Abstract:
Fe-Ni-B coatings were sprayed by plasma spraying and high-velocity flame spraying. Morphologies of the powder and coatings were analyzed by SEM,and chemical composition of the coatings to base was analyzed by EDX. The phase of the coatings was analyzed by XRD. The properties of tensile strength and thermal shock resistance of two coatings were investigated as well. Results show that the plasma sprayed coatings show dense microstructure,and the lamellar structure in the thermal spray coatings is obvious. The distribution of Fe and Ni is even from the coatings to base,which avoids the stress centralization. The micro-cracks in the plasma sprayed coatings are tiny and in disorder,while those in the high-velocity flame sprayed coatings mainly concentrate in the contact area. According the energy theory and elasticity theory,the thermal shock resistance of plasma sprayed coatings is better,and their failure mainly occurs in the contact area.
Key words:  high-velocity flame spraying  plasma spraying  Fe - Ni - B  energy theory  elasticity theory

友情链接LINKS