首页 | 官方网站   微博 | 高级检索  
     

闪光焊工艺对45Si2Cr钢筋焊接接头组织的影响
引用本文:王小玉,朱明.闪光焊工艺对45Si2Cr钢筋焊接接头组织的影响[J].材料科学与工艺,1993,1(2):80-85.
作者姓名:王小玉  朱明
作者单位:哈尔滨工业大学,哈尔滨工业大学,哈尔滨工业大学
摘    要:本文研究了闪光焊工艺对45Si2Cr钢筋焊接接头金相组织的影响规律。结果表明,采用提高二次电压和增大顶锻留量的闪光焊工艺规范,可以消除粗大魏氏组织和宏观组织缺陷,满足45Si2Cr钢筋焊接后所应达到的性能要求。

关 键 词:钢筋  闪光焊  焊接  接头  轨道

Effect of Flash Welding Technology on the Structure of Joints of 45Si2Cr Reinforced Bar
Wang Xiaoyu Zhu Ming Cui Weida.Effect of Flash Welding Technology on the Structure of Joints of 45Si2Cr Reinforced Bar[J].Materials Science and Technology,1993,1(2):80-85.
Authors:Wang Xiaoyu Zhu Ming Cui Weida
Affiliation:Harbin Institute of Technology
Abstract:The flash welding technology of 45Si2Cr reinforced bar and its effect on the metallographic structure wcre studied in this paper. The results show that the coarse Widmanstattcn structure and microstructure defects can be eliminated by raising secondary voltage and enlarging upset allowance during welding process, and the mechanical requirements are satisfied.
Keywords:45Si2Cr reinforced bar  flash welding  structure
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号