期刊检索

  • 2024年第32卷
  • 2023年第31卷
  • 2022年第30卷
  • 2021年第29卷
  • 2020年第28卷
  • 2019年第27卷
  • 2018年第26卷
  • 2017年第25卷
  • 2016年第24卷
  • 2015年第23卷
  • 2014年第22卷
  • 2013年第21卷
  • 2012年第20卷
  • 2011年第19卷
  • 2010年第18卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 中国材料研究学会
哈尔滨工业大学
主编 苑世剑 国际刊号ISSN 1005-0299 国内刊号CN 23-1345/TB

期刊网站二维码
微信公众号二维码
引用本文:刘红生,包军,邢忠文,宋宝玉,杨玉英.高强钢板热冲压成形热力耦合数值模拟[J].材料科学与工艺,2010,18(4):459-463.DOI:10.11951/j.issn.1005-0299.20100404.
LIU Hong-sheng,BAO Jun,XING Zhong-wen,SONG Bao-yu,YANG Yu-ying.Numerical simulation on channel shape hot stamping of 22MnB5 high-strength sheet metal based on thermo-mechanical coupled method[J].Materials Science and Technology,2010,18(4):459-463.DOI:10.11951/j.issn.1005-0299.20100404.
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1655次   下载 1125 本文二维码信息
码上扫一扫!
分享到: 微信 更多
高强钢板热冲压成形热力耦合数值模拟
刘红生1, 包军1, 邢忠文1, 宋宝玉1, 杨玉英2
1.哈尔滨工业大学机电工程学院;2.哈尔滨工业大学材料科学与工程学院
摘要:
为研究高强钢板的热冲压成形性,采用ABAQUS软件对高温下22MnB5高强钢板沟槽形件冲压成形进行了数值模拟研究.建立了基于热力耦合的弹塑性有限元模型和热成形下的材料模型,通过对沟槽形件热成形进行数值模拟,考察了压边力、模具间隙和凹模圆角半径等工艺参数对热成形时温度分布和回弹的影响,给出了热成形中产生回弹的机理,确定了合适的工艺参数,通过热成形试验验证了数值结果的可靠性.
关键词:  数值模拟  有限元  高强钢  热冲压  热力耦合
DOI:10.11951/j.issn.1005-0299.20100404
分类号:TG306
基金项目:黑龙江省自然科学基金资助项目(E2007-11);国家博士后基金资助项目(20080440846)
Numerical simulation on channel shape hot stamping of 22MnB5 high-strength sheet metal based on thermo-mechanical coupled method
LIU Hong-sheng1, BAO Jun1, XING Zhong-wen1, SONG Bao-yu1, YANG Yu-ying2
1.School of Mechatronics Engineering,Harbin Institute of Technology,Harbin 150001,China;2.School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001,China
Abstract:
In order to study the hot stamping of high-strength sheet metal,numerical simulation on 22MnB5 high-strength sheet metal forming at high temperature was conducted through the commercial software ABAQUS.In order to obtain accurate numerical results,an elasto-plastic finite element model based on thermo-mechanical coupled method and a material model were set up.Influences of processing parameters,such as blank holder force,clearance and radius of corner on the temperature distribution and springback were investigated by modeling hot stamping process of the channel shape part.The mechanics of springback during hot forming was developed and the appropriate parameters were obtained.The comparison of numerical results with experimental ones shows that the numerical results are reliable.
Key words:  simulation  finite element  high-strength steel  hot stamping  thermo-mechanical coupled method

友情链接LINKS