首页 | 官方网站   微博 | 高级检索  
     

率相关材料在搅拌摩擦焊接过程中的行为分析
引用本文:张昭,张洪武.率相关材料在搅拌摩擦焊接过程中的行为分析[J].材料科学与工艺,2008,16(5):696-701.
作者姓名:张昭  张洪武
作者单位:大连理工大学,工程力学系工业装备结构分析国家重点实验室,辽宁,大连,116024
基金项目:国家自然科学基金资助项目,长江学者和创新团队发展计划,国家基础性发展规划资助项目
摘    要:为研究金属粘性效应时的搅拌摩擦焊接材料流动行为,采用率相关本构描述搅拌摩擦焊接过程中的材料行为,并与非率相关材料模型的计算结果进行了对比.结果显示,由于考虑了金属的粘性效应.用率相关材料模型模拟搅拌摩擦焊接过程能更好地反映材料流动行为的本质.在搅拌摩擦焊接中,材料沿搅拌头切向方向的运动构成了搅拌摩擦焊接构件材料流动的主要形式.焊接构件-搅拌头接触面上的接触压力在搅拌头前方较大,在搅拌头后方较小,这一规律在率相关模型中更为明显.搅拌头前方材料在搅拌头的挤压之下向远离搅拌头的方向运动,而搅拌头后方的材料要填充由于搅拌头的移动而留下的空间,这一过程是保证搅拌摩擦焊接顺利完成的一个主要因素.因此,用率相关模型模拟搅拌摩擦焊接过程中的材料力学行为更为接近真实情况.

关 键 词:搅拌摩擦焊接  材料流动  率相关  应变率

Analysis of rate dependent material behaviors in friction stir welding process
ZHANG Zhao,ZHANG Hong-wu.Analysis of rate dependent material behaviors in friction stir welding process[J].Materials Science and Technology,2008,16(5):696-701.
Authors:ZHANG Zhao  ZHANG Hong-wu
Affiliation:(State Key Laboratory of Structural Analysis for Industrial Equipment, Dept. of Engineering Mechanics, Dalian University of Technology, Dalian 116024, China, E-mail; zhangz@dlul.edu.cn)
Abstract:; To study the material behaviors in friction stir welding in consideration of viscosity effects,the rate dependent constitutive model was adopted to describe the material behaviors in friction stir welding and the corresponding caculation results were compared with those of the rate independent material model. Results indicate that the simulation of the friction stir welding process by using the rate dependent material model is much more similar to the real manufacture. The tangent movement of the material takes the main contributions in friction stir welding. The contact pressure in front of the pin is much higher than that behind the pin, which can be seen more clearly in the rate dependent material model. Due to the extrusion of the pin, the material in front of the pin moves away from the pin, however, the material behind the pin fills the vacant place formed by the movement of the pin. It is a main factor to perform the friction stir welding process successfully. The predicted material behaviors are closer to those of the real material flow in friction stir welding when the rate dependent model is used.
Keywords:friction stir welding  material flow  rate dependent  strain rate
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号