锂离子电池硅/石墨/碳负极材料性能
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TM912

基金项目:

国家自然科学基金资助项目(20673032);黑龙江省科技攻关重点项目(GB06A309);哈尔滨市学术带头人科技创新基金项目(2007RFXXG012)


Properties of silicon/graphite/carbon anode for Li-ion battery
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为提高锂离子电池硅基材料的循环性能,用高温固相热解法合成硅/石墨/碳复合材料.采用XRD、循环伏安和充放电技术表征其结构和电化学性能.考察不同的粘结剂体系和极片热处理对材料电化学循环性能的影响.结果表明:采用水性粘结剂可以提高材料的电化学性能;对极片进行热处理也可以很好地提高电极的循环稳定性.首次脱锂比容量为970.5 mAh/g,40次循环后,脱锂比容量仍高达822.1 mAh/g.

    Abstract:

    Silicon/graphite/carbon composite was prepared by high temperature pyrolysis and used as the anode of Li-ion battery.The structure and electrochemical properties were characterized by X-ray diffraction(XRD),cyclic voltammetry(CV) and constant current charge-discharge methods.Also,the effects of heating treatment and different binder on electrochemical cycleability were studied,and the results showed that both of the aqueous binder and heating treatment could improve the electrochemical properties and the cycle stability.The optimized anode delivered initial reversible capacity of 970.5 mAh/g and remained 822.1 mAh/g after 40 cycles,which demonstrated high cycle stability.

    参考文献
    相似文献
    引证文献
引用本文

王宏宇,尹鸽平,徐宇虹,左朋建,程新群.锂离子电池硅/石墨/碳负极材料性能[J].哈尔滨工业大学学报,2010,42(12):1916. DOI:10.11918/j. issn.0367-6234.2010.12.015

复制
相关视频

分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2012-05-03
  • 出版日期:
文章二维码