用于超磁致伸缩作动器的一种改进的控制方法
CSTR:
作者:
作者单位:

作者简介:

刘红军(1968—),男, 教授, 博士生导师.

通讯作者:

中图分类号:

TM571.6+1

基金项目:

国家自然科学基金资助项目(51078119);深圳市科技计划项目(JC200903120209A).


An improved control method for the giant magnetostrictive actuator
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为提高对超磁致伸缩作动器的控制精度,在基于Preisach模型前馈补偿的PID控制基础上,提出了一种基于Preisach模型前馈补偿的模糊PID控制方法.采用dSpace实时仿真系统搭建超磁致伸缩作动器的实时控制实验平台.利用研制的超磁致伸缩作动器测试了基于Preisach模型前馈补偿的模糊PID控制与PID控制方法下对方波信号和混合信号的轨迹追踪能力.两种控制方法下的实时控制效果对比分析表明,基于Preisach模型前馈补偿的模糊PID控制比常规PID控制具有更好的控制效果,从而验证了该方法的有效性.

    Abstract:

    To improve control accuracy for the Giant Magnetostrictive Actuator (GMA), the fuzzy PID control method is proposed by the PID control method based on Preisach model. The dSpace real-time simulation system is used to build the real-time control experimental platform of GMA. The designed GMA tests for the PID control method based on the Preisach model and the fuzzy PID control method in the square-wave signal and mixed-signal tracking were carried out. The effect of real-time control of two control methods was compared and analyzed, and the results show that the fuzzy PID control method is better than PID control method.

    参考文献
    相似文献
    引证文献
引用本文

刘红军,刘洁,叶芳.用于超磁致伸缩作动器的一种改进的控制方法[J].哈尔滨工业大学学报,2012,44(9):91. DOI:10.11918/j. issn.0367-6234.2012.09.016

复制
相关视频

分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2012-09-27
  • 出版日期:
文章二维码