Please submit manuscripts in either of the following two submission systems

    ScholarOne Manuscripts

  • ScholarOne
  • 勤云稿件系统

  • 登录

Search by Issue

  • 2024 Vol.31
  • 2023 Vol.30
  • 2022 Vol.29
  • 2021 Vol.28
  • 2020 Vol.27
  • 2019 Vol.26
  • 2018 Vol.25
  • 2017 Vol.24
  • 2016 vol.23
  • 2015 vol.22
  • 2014 vol.21
  • 2013 vol.20
  • 2012 vol.19
  • 2011 vol.18
  • 2010 vol.17
  • 2009 vol.16
  • No.1
  • No.2

Supervised by Ministry of Industry and Information Technology of The People's Republic of China Sponsored by Harbin Institute of Technology Editor-in-chief Yu Zhou ISSNISSN 1005-9113 CNCN 23-1378/T

期刊网站二维码
微信公众号二维码
Related citation:Kun Liu,Yonggang Yu,Na Zhao.Experimental Study and Numerical Simulation on Spray Characteristics of New-Type Air-Assist Nozzle[J].Journal of Harbin Institute Of Technology(New Series),2016,23(1):34-40.DOI:10.11916/j.issn.1005-9113.2016.01.005.
【Print】   【HTML】   【PDF download】   View/Add Comment  Download reader   Close
←Previous|Next→ Back Issue    Advanced Search
This paper has been: browsed 1794times   downloaded 1010times 本文二维码信息
码上扫一扫!
Shared by: Wechat More
Experimental Study and Numerical Simulation on Spray Characteristics of New-Type Air-Assist Nozzle
Author NameAffiliation
Kun Liu School of Energy and Power EngineeringNanjing University of Science and TechnologyNanjing 210094China 
Yonggang Yu School of Energy and Power EngineeringNanjing University of Science and TechnologyNanjing 210094China 
Na Zhao Northwest Institute of Mechanical & Electrical EngineeringXianyang 712099ShanxiChina 
Abstract:
To investigate the spray characteristics of a new-type air-assist nozzle, three-dimensional laser phase Dopper analyzer (PDA) was used to measure the spray parameters. The external flow fields of the nozzle were simulated by means of computational fluid dynamics (CFD). The distributions of the diameter and the axial velocity for the droplets were analyzed respectively. The results indicate that, the mean diameter of the droplets fluctuates along the center axis. The distance between the measurement point and the nozzle increases, the axial velocity of the droplets decreases. The further the measurement point from the center axis is, the smaller the axial velocity of the droplets is. With the increase of the nozzle pressure drop, the axial velocity of the droplets improves while the mean diameter of the droplets is reduced, and the distribution uniformity of the droplets is better for the diameter. The simulation result agrees well with the experimental data. The average deviation ranges from 3.9% to 7.7%.
Key words:  air-assist nozzle  spray  droplet  numerical simulation
DOI:10.11916/j.issn.1005-9113.2016.01.005
Clc Number:V434+.3
Fund:

LINKS