Please submit manuscripts in either of the following two submission systems

    ScholarOne Manuscripts

  • ScholarOne
  • 勤云稿件系统

  • 登录

Search by Issue

  • 2024 Vol.31
  • 2023 Vol.30
  • 2022 Vol.29
  • 2021 Vol.28
  • 2020 Vol.27
  • 2019 Vol.26
  • 2018 Vol.25
  • 2017 Vol.24
  • 2016 vol.23
  • 2015 vol.22
  • 2014 vol.21
  • 2013 vol.20
  • 2012 vol.19
  • 2011 vol.18
  • 2010 vol.17
  • 2009 vol.16
  • No.1
  • No.2

Supervised by Ministry of Industry and Information Technology of The People's Republic of China Sponsored by Harbin Institute of Technology Editor-in-chief Yu Zhou ISSNISSN 1005-9113 CNCN 23-1378/T

期刊网站二维码
微信公众号二维码
Related citation:Hussein Hayder Mohammed Ali,Adnan M Hussein,Kadum Mohammed Hussain Allami,Barhm Mohamad.Evaluation of Shell and Tube Heat Exchanger Performance by Using ZnO/Water Nanofluids[J].Journal of Harbin Institute Of Technology(New Series),2023,30(6):62-69.DOI:10.11916/j.issn.1005-9113.2023001.
【Print】   【HTML】   【PDF download】   View/Add Comment  Download reader   Close
←Previous|Next→ Back Issue    Advanced Search
This paper has been: browsed 2948times   downloaded 2879times 本文二维码信息
码上扫一扫!
Shared by: Wechat More
Evaluation of Shell and Tube Heat Exchanger Performance by Using ZnO/Water Nanofluids
Author NameAffiliation
Hussein Hayder Mohammed Ali Technical Engineering College/ Kirkuk, Northern Technical University, Kirkuk 36001, Iraq 
Adnan M Hussein Technical Engineering College/ Kirkuk, Northern Technical University, Kirkuk 36001, Iraq 
Kadum Mohammed Hussain Allami Computer Engineering Techniques Department, Al-Kitab University, Kirkuk 36001, Iraq 
Barhm Mohamad Department of Petroleum Technology, Koya Technical Institute, Erbil Polytechnic University, Erbil 44001, Iraq 
Abstract:
To examine and investigate the impact of nanofluid on heat exchanger performance, including the total heat transfer, the effect of friction factor, the average Nusselt number, and the thermal efficiency, the output heat transfers of a shell and tube heat exchanger using ZnO nanoparticles suspended in water has been conducted numerically. The governing equations were solved using finite volume techniques and CFD simulations with ANSYS/FLUENT Solver 2021. The nanoparticles volume fractions adopted are 0.2% and 0.35% that used in numerical computations under 200 to 1400 Reynolds numbers range. The increasing of temperature is approximately 13% from the bottom to the top of heat exchanger, while the maximum enhancement of Nusselt number is about 10%, 19% for volume fractions 0.2% and 0.35% respectively. The elevated values of the friction factor at the volumetric ratios of 0.2% and 0.35% are 0.25% and 0.47% respectively. The findings demonstrate that the performance efficiency of shell and tube heat exchanger is enhanced due to the increase in Nusselt number.
Key words:  CFD  Reynold number  thermal efficiency  Nusselt number  nanofluid  heat exchanger
DOI:10.11916/j.issn.1005-9113.2023001
Clc Number:TK11
Fund:

LINKS