期刊检索

  • 2024年第32卷
  • 2023年第31卷
  • 2022年第30卷
  • 2021年第29卷
  • 2020年第28卷
  • 2019年第27卷
  • 2018年第26卷
  • 2017年第25卷
  • 2016年第24卷
  • 2015年第23卷
  • 2014年第22卷
  • 2013年第21卷
  • 2012年第20卷
  • 2011年第19卷
  • 2010年第18卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 中国材料研究学会
哈尔滨工业大学
主编 苑世剑 国际刊号ISSN 1005-0299 国内刊号CN 23-1345/TB

期刊网站二维码
微信公众号二维码
引用本文:王海涛,张守全,黄继华,朱警雷,张华.以蔗糖为前驱体制备TiC/Fe复合涂层[J].材料科学与工艺,2010,18(1):11-14.DOI:10.11951/j.issn.1005-0299.20100103.
WANG Hai-tao,ZHANG Shou-quan,HUANG Ji-hua,ZHU Jing-lei,ZHANG Hua.Preparation of TiC/Fe composite coating by using sucrose as carbonaceous precursor[J].Materials Science and Technology,2010,18(1):11-14.DOI:10.11951/j.issn.1005-0299.20100103.
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1306次   下载 1037 本文二维码信息
码上扫一扫!
分享到: 微信 更多
以蔗糖为前驱体制备TiC/Fe复合涂层
王海涛1, 张守全1,2, 黄继华1,3, 朱警雷1, 张华1
1.北京科技大学材料科学与工程学院;2.哈尔滨工业大学焊接国家重点实验室;3.厦门金鹭特种合金有限公司
摘要:
以TiFe粉和蔗糖为原料,通过蔗糖的热分解碳化制备Ti-Fe-C系反应热喷涂复合粉末,利用普通氧乙炔火焰喷涂成功制备出TiC/Fe复合涂层.采用XRD、SEM和TEM等对喷涂粉末和涂层的组织结构、涂层中的TiC颗粒进行了分析.研究结果表明:TiC/Fe复合涂层主要由TiC颗粒均匀分布于Fe基体中的复合强化片层构成,片层中TiC颗粒呈球形或近球形,粒径约为50nm;纳米级TiC颗粒增强的复合强化片层占涂层体积的60%以上.
关键词:  反应火焰喷涂  TiC/Fe复合涂层  纳米颗粒  前驱体
DOI:10.11951/j.issn.1005-0299.20100103
分类号:TB304
基金项目:哈尔滨工业大学现代焊接生产技术国家重点实验室开放课题资助项目;河南杰出人才创新基金资助项目(0421001000)
Preparation of TiC/Fe composite coating by using sucrose as carbonaceous precursor
WANG Hai-tao1, ZHANG Shou-quan1,2, HUANG Ji-hua1,3, ZHU Jing-lei1, ZHANG Hua1
1.School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China;2.Xiamen Golden Egret Special Alloy Co. Ltd. ,Xiamen 361006,China;3.National Key Laboratory of Advanced Welding Production Technology,Harbin Institution of Technology,Harbin 150001,China
Abstract:
In this paper,TiC/Fe composite coatings were synthesized and deposited by reactive flame spray, using a kind of Ti-Fe-C composite powder prepared by carbonizing the mixture of ferrotitanium and sucrose as precursor. XRD,SEM and TEM were employed to analyze the microstructures of the composite powder and the coatings. It is showed that the composite coatings are mainly composed of composite layers,in which the TiC particles are dispersed within the Fe-alloy matrix,and TiC particles in these layers are spherical or nearspherical with the size of 50 nm or so. The volume content of composite layers in the coating is above 60% .
Key words:  reactive flame spray  TiC/Fe composite coating  nanometer particle  precursor

友情链接LINKS