期刊检索

  • 2024年第32卷
  • 2023年第31卷
  • 2022年第30卷
  • 2021年第29卷
  • 2020年第28卷
  • 2019年第27卷
  • 2018年第26卷
  • 2017年第25卷
  • 2016年第24卷
  • 2015年第23卷
  • 2014年第22卷
  • 2013年第21卷
  • 2012年第20卷
  • 2011年第19卷
  • 2010年第18卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 中国材料研究学会
哈尔滨工业大学
主编 苑世剑 国际刊号ISSN 1005-0299 国内刊号CN 23-1345/TB

期刊网站二维码
微信公众号二维码
引用本文:梁基照,吴成宝.ABS/HGB复合材料断口分形维及其与冲击强度的关系[J].材料科学与工艺,2010,18(2):178-182.DOI:10.11951/j.issn.1005-0299.20100207.
LIANG Ji-zhao,WU Cheng-bao.Relationship between the fractal dimension of fracture surface and the impact strength of ABS/HGB composites[J].Materials Science and Technology,2010,18(2):178-182.DOI:10.11951/j.issn.1005-0299.20100207.
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1368次   下载 1009 本文二维码信息
码上扫一扫!
分享到: 微信 更多
ABS/HGB复合材料断口分形维及其与冲击强度的关系
梁基照, 吴成宝
华南理工大学机械与汽车工程学院
摘要:
为了改善填料与基体树脂的相容性,应用硅烷偶联剂对中空玻璃微珠(HGB)进行表面处理,并制备了HGB填充聚丙烯腈-丁二烯-苯乙烯三元共聚物(ABS)复合材料,HGB的体积分数为0~15%.在室温条件下,测量了ABS/HGB复合材料的冲击强度.基于冲击断口的SEM图像,采用像素点覆盖法和投影覆盖法测算了ABS/HGB复合材料的冲击断口表面分形维(Ds),并考察了分形维与复合材料冲击断裂强度(σI)的关系.结果表明,ABS/HGB复合材料的冲击强度与断口表面分形维密切相关:σI随着Ds的增加而提高,两者之间呈指数函数关系.应用像素点覆盖法测算的Ds值为1.62~1.74,而应用投影覆盖法测算的Ds值则为2.51~2.58.
关键词:  复合材料  ABS树脂  中空玻璃微珠  冲击断口  分形维  冲击强度
DOI:10.11951/j.issn.1005-0299.20100207
分类号:TB332
基金项目:
Relationship between the fractal dimension of fracture surface and the impact strength of ABS/HGB composites
LIANG Ji-zhao, WU Cheng-bao
School of Mechanical and Automobile Engineering,South China University of Technology,Guangzhou 510640, China
Abstract:
The particle surface of hollow glass bead (HGB) was treated by a silane coupling agent to improve the compatibility between the filler and the matrix resin,and the HGB filled poly(acrylonitrile-butadiene-styrene)copolymer (ABS) composites were prepared by means of melt blending. The volume fraction of filler was ranged from 0 to 15% . The impact strength ( σ I) of the composite was measured at room temperature. On the basis of the SEM photograph of the impact fracture surface,fractal dimensions ( Ds) of the impact fracture surface of ABS/HGB composites were measured respectively by means of pixel-covering method and projectivecovering method,to investigate the relationship between the fractal dimension and the impact strength of the composites. Results show that the impact strength was related closely to the fractal dimensions: σI inceased with an increase of Ds,and the relationship between σI and Ds can be describled by an exponential function. Furthermore,the Ds measured by pixel-covering meathod were from 1. 62 to 1. 74,while the Ds measured by projective-covering meathod were from 2. 51 to 2. 58.
Key words:  composite  poly ( acrylonitrile-butadiene-styrene) copolymer resin  hollow glass bead  impact fracture  fractal dimension  impact strength

友情链接LINKS