| 引用本文: | 李峰,徐永超,王小松,刘晓晶.塑性体积成形过程的变形分区及可视化研究[J].材料科学与工艺,2010,18(2):267-271.DOI:10.11951/j.issn.1005-0299.20100226. |
| LI Feng,XU Yong-chao,WANG Xiao-song,LIU Xiao-jing.Deforming division and visualization in plastic bulk forming process[J].Materials Science and Technology,2010,18(2):267-271.DOI:10.11951/j.issn.1005-0299.20100226. |
|
| 摘要: |
| 针对塑性体积成形过程复杂且金属流动行为难于分析的现状,从塑性加工力学角度,提出了利用J2不变量和罗德系数μσ等应力场特征量的变形分区方法,可对塑性区的范围及材料所处应变类型进行定量分析.并通过二次开发实现了塑性体积成形过程的可视化,能够直观地给出塑性区内任意部位材料所处应力应变的定量分布规律. |
| 关键词: 体积成形 变形分区 可视化 应力应变 |
| DOI：10.11951/j.issn.1005-0299.20100226 |
| 分类号:TG306 |
| 基金项目:哈尔滨市青年科技创新人才基金资助项目(RC2010QN017008);黑龙江省教育厅科研项目(11541042) |
|
| Deforming division and visualization in plastic bulk forming process |
|
LI Feng1, XU Yong-chao2, WANG Xiao-song2, LIU Xiao-jing1
|
|
1.College of Materials Science and Engineering,Harbin University of Science and Technology,Harbin 150040,China;2.School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001,China
|
| Abstract: |
| For the complex and hard analysis of metal flow behaviors in plastic bulk forming process,a deformation division method of using the second invariant of the deviatoric stress tensor J 2 and Lode parameter μ σ is put forward from the view of plastic mechanics. Quantitative analysis on the plastic zone and the strain type of material can be conducted. Through a second development,the visualization of plastic bulk forming process is realized,which can directly describe the quantitative distribution rule of stress and strain in any plastic regions. |
| Key words: bulk forming deformation division visualization stress and strain |
