期刊检索

  • 2024年第32卷
  • 2023年第31卷
  • 2022年第30卷
  • 2021年第29卷
  • 2020年第28卷
  • 2019年第27卷
  • 2018年第26卷
  • 2017年第25卷
  • 2016年第24卷
  • 2015年第23卷
  • 2014年第22卷
  • 2013年第21卷
  • 2012年第20卷
  • 2011年第19卷
  • 2010年第18卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 中国材料研究学会
哈尔滨工业大学
主编 苑世剑 国际刊号ISSN 1005-0299 国内刊号CN 23-1345/TB

期刊网站二维码
微信公众号二维码
引用本文:周健,郭斌,单德彬.铜箔抗拉强度及延伸率的尺寸效应研究[J].材料科学与工艺,2010,18(4):445-449.DOI:10.11951/j.issn.1005-0299.20100401.
ZHOU Jian,GUO Bin,SHAN De-bin.Research of size effects on tensile strength and elongation of copper foil[J].Materials Science and Technology,2010,18(4):445-449.DOI:10.11951/j.issn.1005-0299.20100401.
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1563次   下载 1029 本文二维码信息
码上扫一扫!
分享到: 微信 更多
铜箔抗拉强度及延伸率的尺寸效应研究
周健, 郭斌, 单德彬
哈尔滨工业大学材料科学与工程学院
摘要:
为了研究尺寸参数对金属箔材的抗拉强度和延伸率的影响规律,采用不同厚度和晶粒尺寸的铜箔进行室温单向拉伸试验.试验结果表明:铜箔的抗拉强度和延伸率同时受厚度和晶粒尺寸的影响,这种尺寸效应的描述必须引入无量纲的厚度晶粒尺寸比(T/D)作为比较参数.抗拉强度在不同厚度晶粒尺寸比区间内的变化规律不同;而延伸率在厚度晶粒尺寸比相同时都随厚度的减小而降低.拉伸断口的扫描电镜分析显示箔材的延伸率随着厚度的减小出现的突降和断裂机制的变化有关.
关键词:  铜箔  抗拉强度  延伸率  尺寸效应  厚度晶粒尺寸比  断口分析
DOI:10.11951/j.issn.1005-0299.20100401
分类号:TG146.11
基金项目:国家高技术研究发展计划资助项目(2006AA04Z316,2006AA04Z331);国家自然科学重点基金资助项目(50835002);黑龙江省杰出青年科学基金资助项目(JC-05-11)
Research of size effects on tensile strength and elongation of copper foil
ZHOU Jian, GUO Bin, SHAN De-bin
School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001,China
Abstract:
Tensile tests of copper foil with various thickness and grain sizes were performed at room temperature to investigate the size effects on tensile strength and elongation.The results show that the tensile strength and elongation are affected by the thickness and grain size together,and then the ratio of thickness to average grain diameter(T/D ratio) must be introduced to represent the size effects rightly.The relationships between the tensile strength and T/D ratio are different in distinct T/D ratio intervals.The elongation decreases with the decreasing thickness while the T/D ratio is constant.The tensile fracture surface was observed by SEM.The analyses indicate that the sharp decline of elongation with the decreasing thickness is attributed to the transformation of fracture mechanism.
Key words:  copper foil  tensile strength  elongation  size effect  ratio of thickness to average grain diameter  fracture surface analysis

友情链接LINKS