期刊检索

  • 2024年第32卷
  • 2023年第31卷
  • 2022年第30卷
  • 2021年第29卷
  • 2020年第28卷
  • 2019年第27卷
  • 2018年第26卷
  • 2017年第25卷
  • 2016年第24卷
  • 2015年第23卷
  • 2014年第22卷
  • 2013年第21卷
  • 2012年第20卷
  • 2011年第19卷
  • 2010年第18卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 中国材料研究学会
哈尔滨工业大学
主编 苑世剑 国际刊号ISSN 1005-0299 国内刊号CN 23-1345/TB

期刊网站二维码
微信公众号二维码
引用本文:牛海军,张密林,臧文静,张琳,白续铎,王文.聚邻甲基苯胺的电化学合成与电色及光伏性能[J].材料科学与工艺,2010,18(6):796-800.DOI:10.11951/j.issn.1005-0299.20100612.
NIU Hai-jun,ZHANG Mi-lin,ZANG Wen-jing,ZHANG Lin,BAI Xu-duo,WANG Wen.Electrochemical synthesis and electrochromic,photovoltaic properties of poly(o-toluidine)[J].Materials Science and Technology,2010,18(6):796-800.DOI:10.11951/j.issn.1005-0299.20100612.
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1321次   下载 1029 本文二维码信息
码上扫一扫!
分享到: 微信 更多
聚邻甲基苯胺的电化学合成与电色及光伏性能
牛海军1,2, 张密林1, 臧文静3, 张琳3, 白续铎3, 王文4
1.哈尔滨工程大学材料科学与化学工程学院;2.黑龙江大学功能无机材料化学省部共建教育部重点实验室化学与化工材料学院高分子重点实验室;3.龙江大学功能无机材料化学省部共建教育部重点实验室化学与化工材料学院高分子重点实验室;4.哈尔滨工业大学材料科学与工程学院先进陶瓷研究所
摘要:
为了得到平整并与基底结合牢固的聚邻甲苯胺,使之在电致变色和光伏材料上得到应用,用电化学的方法在ITO电极上制备了聚邻甲苯胺.考察了聚合条件对成膜的影响,对聚合物薄膜进行了红外、拉曼、紫外、荧光等结构表征,利用电子扫描显微镜(SEM)观测了复合膜形貌特征,采用原位电化学-光谱技术研究了聚合物的电致变色行为.首次以聚邻甲苯胺/TiO2复合膜为工作电极,铂电极为对电极,制成太阳能电池模型,测试了器件的光伏性能.研究表明:在聚合条件为单体浓度0.2 mol/L,硫酸浓度在0.5~1 mol/L、扫描速度0.02 V/s、扫描电压0~1.0 V时得到膜牢固平整;薄膜呈现岛状突起结构;电压从0增加至0.8 V,薄膜颜色从绿到蓝变化,且过程可逆;复合电极显示出明显的光伏特性.因此,说明聚邻甲苯胺是一种双功能性材料.
关键词:  聚邻甲基苯胺  修饰电极  电沉积  太阳能电池
DOI:10.11951/j.issn.1005-0299.20100612
分类号:O633.21
基金项目:国家自然基金资助项目(50903028;50872024);中国博士后基金资助项目(20070410892);哈尔滨青年基金资助项目(2005AFQXJ062);黑龙江科技厅项目(QC08C10)
Electrochemical synthesis and electrochromic,photovoltaic properties of poly(o-toluidine)
NIU Hai-jun,ZHANG Mi-lin,ZANG Wen-jing,ZHANG Lin,BAI Xu-duo,WANG Wen
1.College of Materials Science and Chemical Engineering,Harbin Engineering University,Harbin 150001,China;2.Key Laboratory of Functional Inorganic Material Chemistry(Heilongjiang University),Ministry of Education,Key laboratory Macromolecular Chemistry,Harbin 150001,China;3.Institute of Advanced Ceramic, School of Material Science and Engineering,Harbin Institute of Technology,Harbin 150080,China
Abstract:
In order to obtain smooth poly(o-toluidine)(POT) binding tight to the base in application of the electrochromic and photovoltaic devices,POT film was prepared by electrochemical method.The influence of polymerization condition on the film-forming was investigated,and the polymer was characterized by Infared(IR),Raman,Ultra-visible(UV),Fluorencence spectra(FL).The morphology of surface was studied by scanning electron microscope(SEM),and the electrochromic properties was determined.POT/TiO2 was firstly used as photo anode in dye sensitized solar cell,and the photovoltaic properties was studied.The results show that POT is smooth and firm at the concentration of H2SO4 in the range of 0.5~1 mol/L and monomer at 0.2 mol/L,scanning speed at 0.02 V/s,applied voltage ranged from 0 V to 1.0 V.The morphology displayed protruding island,and with the increase of the applied voltage from 0~0.8 V,the color of the polymer turns from green to blue reversibly;TiO2 electrode modified by polymer film has good response on irradiation.POT is a bifunctional material in solar cell and electrochromic device.
Key words:  Poly(o-toluidine)  modified electrode  electrodeposition  solar cell

友情链接LINKS