期刊检索

  • 2024年第32卷
  • 2023年第31卷
  • 2022年第30卷
  • 2021年第29卷
  • 2020年第28卷
  • 2019年第27卷
  • 2018年第26卷
  • 2017年第25卷
  • 2016年第24卷
  • 2015年第23卷
  • 2014年第22卷
  • 2013年第21卷
  • 2012年第20卷
  • 2011年第19卷
  • 2010年第18卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 中国材料研究学会
哈尔滨工业大学
主编 苑世剑 国际刊号ISSN 1005-0299 国内刊号CN 23-1345/TB

期刊网站二维码
微信公众号二维码
引用本文:孔德军,吴永忠,龙丹.激光冲击对X70焊接接头慢拉伸电化学腐蚀的影响[J].材料科学与工艺,2012,20(1):139-143,138.DOI:10.11951/j.issn.1005-0299.20120128.
KONG De-jun,WU Yong-zhong,LONG Dan.Effects of laser shock processing on electrochemical corrosion properties of X70 pipeline steel welded joints by slow strain rate testing[J].Materials Science and Technology,2012,20(1):139-143,138.DOI:10.11951/j.issn.1005-0299.20120128.
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 2359次   下载 1311 本文二维码信息
码上扫一扫!
分享到: 微信 更多
激光冲击对X70焊接接头慢拉伸电化学腐蚀的影响
孔德军, 吴永忠, 龙丹
常州大学机械工程学院,江苏 常州 213016,E-mail:kong-dejun@163.com
摘要:
为了改善X70管线钢焊接接头慢拉伸电化学腐蚀性能,用激光冲击波对X70管线钢焊接接头表面进行强化处理.采用慢应变速率拉伸法分析了X70管线钢焊接接头,在不同H2S浓度的NACE溶液(0.5%HAC+5%NaCl)中电化学腐蚀行为,测试了激光冲击处理前后X70管线钢焊接接头腐蚀电位,讨论了激光冲击处理对X70管线钢焊接接头腐蚀电位和断口形貌的影响.实验结果表明,激光冲击处理改善了X70管线钢焊接接头腐蚀性能,其SCC敏感性指数Iscc降低了6%.经激光冲击处理后试样自然腐蚀电位正移,极化电阻逐渐增大,其耐蚀性比原始状态有所提高.
关键词:  激光冲击处理  X70管线钢  焊接接头  慢拉伸  电化学腐蚀
DOI:10.11951/j.issn.1005-0299.20120128
分类号:V261.8;O346.2;TG174.3
基金项目:江苏省自然科学基金资助项目(BK2009104),江苏省普通高校研究生科研创新计划项目(CXLX11-0388)
Effects of laser shock processing on electrochemical corrosion properties of X70 pipeline steel welded joints by slow strain rate testing
KONG De-jun, WU Yong-zhong, LONG Dan
College of Mechanical Engineering,Changzhou University,Changzhou 213016,China,E-mail:kong-dejun@163.com
Abstract:
For the improvement of electrochemical corrosion properties of X70 pipeline steel welded joint during slow-strain rate tension,the surface of the welded joint was processed by laser shock wave.The electrochemical corrosion behaviors in NAC solution (0.5%HAC+5%NaCl) with different H2S concentrations were analyzed,and the corrosion potentials of the welded joint before and after laser shock processing were measured.The effects of laser shock processing on corrosion potentials and fracture morphologies were discussed.The results show that the corrosion resistance is improved by laser shock processing,and the sensitivity index of SCC Iscc decreases about 6%.The spontaneous potential is moved to the positive direction,the polarization resistance is increased gradually,and the corrosion resistance is higher than that in primitive state.
Key words:  laser shock processing  X70 pipeline steel  welded joint  slow strain rate test (SSRT)  electrochemical corrosion

友情链接LINKS