| 引用本文: | 李峰,张鑫龙,初冠南.凹模转动挤压成形过程的有限元分析[J].材料科学与工艺,2012,20(2):117-121.DOI:10.11951/j.issn.1005-0299.20120222. |
| LI Feng,ZHANG Xin-long,CHU Guan-nan.Finite element analysis of rotating container in extrusion process[J].Materials Science and Technology,2012,20(2):117-121.DOI:10.11951/j.issn.1005-0299.20120222. |
|
| 摘要: |
| 降低能耗及提高制品性能是当前挤压加工技术领域的一个共性问题,采用数值模拟方法对转模挤压成形过程进行研究,结果表明:随着凹模转速的增加,塑性区范围显著地扩大,转速由0增加到0.314 rad/s时,挤出速度均值增大了1.5倍,成形载荷极值降幅达40%；当挤压速度由0.157 mm/s增大至0.628 mm/s时,挤压载荷峰值增大了38.6%,挤出速度均值增大了1倍.当其他条件不变时,应综合考虑挤压速度及凹模转速之间数值的合理匹配关系. |
| 关键词: 凹模转动 挤压 降低能耗 挤出速度均值 |
| DOI：10.11951/j.issn.1005-0299.20120222 |
| 分类号:TG376 |
| 基金项目:教育部博士点新教师基金资助项目(20112303120001)；黑龙江省自然科学基金资助项目(E201128)；哈尔滨理工大学青年拔尖创新人才培养计划资助项目. |
|
| Finite element analysis of rotating container in extrusion process |
|
LI Feng1, ZHANG Xin-long1, CHU Guan-nan2
|
|
1.College of Materials Science and Engineering,Harbin University of Science and Technology,Harbin 150040,China,E-mail:hitlif@12;2.School of Naval Architecture,Harbin Institute of Technology at Weihai,Weihai 264209,China
|
| Abstract: |
| To reduce energy consumption and improve product performance,numerical simulation is conducted to analyze the extrusion process with rotating container.The results show that the plastic zone is enlarged significantly with the increase of rotation speed of the concave die.As the rotation speed increases from 0 to 0.314 rad/s,the mean exit velocity of the extruded material increases 1.5 times,and the peak of extrusion load decreases by 40%.As the mean extrusion speed increases from 0.157 mm/s to 0.628 mm/s,the peak of extrusion load increases by 38.6%,and the mean exit speed of the extruded material increases by 1 time.Consequently,the extrusion speed and rotation speed should be matched each other when the other parameters are kept constant. |
| Key words: rotating container extrusion reducing energy consumption mean exit velocity of the extruded |
