期刊检索

  • 2024年第32卷
  • 2023年第31卷
  • 2022年第30卷
  • 2021年第29卷
  • 2020年第28卷
  • 2019年第27卷
  • 2018年第26卷
  • 2017年第25卷
  • 2016年第24卷
  • 2015年第23卷
  • 2014年第22卷
  • 2013年第21卷
  • 2012年第20卷
  • 2011年第19卷
  • 2010年第18卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 中国材料研究学会
哈尔滨工业大学
主编 苑世剑 国际刊号ISSN 1005-0299 国内刊号CN 23-1345/TB

期刊网站二维码
微信公众号二维码
引用本文:王建,陈晋南,代攀.PEN单聚合物复合材料的热压制备工艺与性能[J].材料科学与工艺,2012,20(4):104-107,115.DOI:10.11951/j.issn.1005-0299.20120420.
WANG Jian,CHEN Jin-nan,DAI Pan.Hot pressing process and properties of polyethylene naphthalate single-polymer-composites[J].Materials Science and Technology,2012,20(4):104-107,115.DOI:10.11951/j.issn.1005-0299.20120420.
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 3038次   下载 2301 本文二维码信息
码上扫一扫!
分享到: 微信 更多
PEN单聚合物复合材料的热压制备工艺与性能
王建, 陈晋南, 代攀
北京理工大学 化工与环境学院,北京100081
摘要:
为了实现聚萘二甲酸乙二醇酯(PEN)单聚合物复合材料(SPCs)的制备,使用DSC热分析法确定了制备PEN SPCs的加工温度范围,根据PEN的过冷性质热压制备了PEN SPCs.通过SEM研究了PEN SPCs的界面粘结性,使用万能试验机比较了PEN SPCs与未增强PEN的力学性能.研究结果表明:PEN SPCs中的基体PEN树脂与增强体PEN纤维之间具有良好的界面粘结性;制备的PEN SPCs的拉伸强度为224 MPa,是未增强的PEN拉伸强度的3.6倍.
关键词:  聚萘二甲酸乙二醇酯(PEN)  单聚合物复合材料(SPCs)  热压
DOI:10.11951/j.issn.1005-0299.20120420
分类号:
基金项目:北京理工大学基础研究基金资助项目(3100012211108).
Hot pressing process and properties of polyethylene naphthalate single-polymer-composites
WANG Jian, CHEN Jin-nan, DAI Pan
School of Chemical Engineering & Environment,Beijing Institute of Technology,Beijing 100081,China
Abstract:
To prepare polyethylene naphthalate single-polymer-composites (PEN SPCs),the processing temperature range was obtained by differential scanning calorimetry (DSC),then the PEN SPCs were prepared by hot pressing based on supercooling property of polymers.The interfacial strength in the PEN SPCs was observed by scanning electron microscope (SEM),the tensile strength of the PEN SPCs and pure PEN were measured and compared by a universal testing machine.The results showed that the PEN SPCs had good interfacial strength between the fibers and matrix,and the tensile strength of the PEN SPCs was 224 MPa which was 3.6 times stronger than that of the pure PEN.
Key words:  polyethylene naphthalate (PEN)  single-polymer-composites (SPCs)  hot pressing

友情链接LINKS