| 引用本文: | 李乃朴,孟令刚,房灿峰,朱琼,吴友芳,彭鹏,张兴国.挤轧复合变形制备电磁连铸AZ61板材[J].材料科学与工艺,2012,20(5):95-100.DOI:10.11951/j.issn.1005-0299.20120519. |
| LI Nai-pu,MENG Ling-gang,FANG Can-feng,ZHU Qiong,WU You-fang,PENG Peng,ZHANG Xing-guo.Electromagnetic continuous casting AZ61 sheets by extruding and rolling deformation[J].Materials Science and Technology,2012,20(5):95-100.DOI:10.11951/j.issn.1005-0299.20120519. |
|
| 摘要: |
| 通过挤压后再轧制的方法制备AZ61镁合金板材,利用动态再结晶产生局部剪切变形减弱挤压形成的{0002}基面织构,可以有效提高板材的塑性成形能力,对比分析了直接轧制75%变形量与挤轧复合轧制60%变形量的AZ61电磁半连铸镁合金板材.结果表明,两种工艺方法所得到的板材力学性能相近,前者抗拉强度σb=300 MPa,屈服强度σ0.2=230 MPa,延伸率δ=8.0%,后者σb=295 MPa,σ0.2=245 MPa,δ=8.2%.因此,可以通过挤轧复合的工艺方法利用较小的轧制变形量(60%)制备出与较大轧制变形量(75%)性能相近的镁合金板材. |
| 关键词: 电磁连铸 基面织构 动态再结晶 挤轧复合 |
| DOI：10.11951/j.issn.1005-0299.20120519 |
| 分类号: |
| 基金项目:国家自然科学基金资助(50875031)；航空科学基金(20095263005). |
|
| Electromagnetic continuous casting AZ61 sheets by extruding and rolling deformation |
|
LI Nai-pu, MENG Ling-gang, FANG Can-feng, ZHU Qiong, WU You-fang, PENG Peng, ZHANG Xing-guo
|
|
School of Material Science and Engineering,Dalian University of Technology,Dalian 116024,China
|
| Abstract: |
| The dynamic recrystallization in the process of extruding and rolling deformation can weaken the {0002} basal texture in the extrusion,and effectively increase the plastic forming ability of Electromagnetic continuous casting (EMC) AZ61 sheets.The EMC AZ61 sheets fabricated by 75% rolling deformation and 60% extruding and rolling deformation were compared.The results showed that the two different sheets have similar mechanical properties,of which the tensile strengths are of 300 and 295 MPa,the yield strengths are of 230 and 245 MPa,while the elongations are of 8.0% and 8.2%,respectively.Therefore,the EMC AZ61 sheets fabricated by 75% rolling deformation can be manufactured by extruding and rolling with less deformation of 60%. |
| Key words: electromagnetic continuous casting(EMC) basal texture dynamic recrystallization (DRX) extruding and rolling deformation |
