| 引用本文: | 王菲,姚卫国,管东波,王守军,安慧,贾玉玺.PVC搪塑粉的热降解特征及其动力学研究[J].材料科学与工艺,2014,22(2):55-60.DOI:10.11951/j.issn.1005-0299.20140210. |
| WANG Fei,YAO Weiguo,GUAN Dongbo,WANG Shoujun,AN Hui,JIA Yuxi.Thermal degradation characteristics and kinetics of PVC slush powder[J].Materials Science and Technology,2014,22(2):55-60.DOI:10.11951/j.issn.1005-0299.20140210. |
|
| 本文已被：浏览 1147次 下载 1436次 |
码上扫一扫！ |
|
|
| PVC搪塑粉的热降解特征及其动力学研究 |
|
王菲1,姚卫国2,管东波2,王守军3,安慧3,贾玉玺1
|
|
(1.山东大学 材料液固结构演变与加工教育部重点实验室,济南250061; 2.吉林大学 材料科学与工程学院,长春130022;3.长春富维-江森自控汽车饰件系统有限公司,长春130033)
|
|
| 摘要: |
| 粉末搪塑表皮被广泛应用在各种中高档汽车仪表板上.为了优化设计搪塑粉、提高热加工性能从而促进高档汽车国产化,本文首先利用热重分析和裂解气相色谱/质谱实验探讨搪塑粉的热降解失重特征,分析升温速率、实验气氛和搪塑加工对其热降解行为的影响,继而结合X射线荧光光谱实验对其热降解动力学进行研究.结果表明:搪塑粉的热降解过程可分为3个阶段,PVC和增塑剂的相互作用使其热降解过程更加复杂；随升温速率的增加,热降解失重曲线向高温区偏移；搪塑粉在有氧气氛中更易发生热降解,失重率较大；与搪塑粉相比,搪塑表皮的热稳定性能得到一定程度的提升；第1热降解阶段氮气条件下的热降解活化能和反应级数较小. |
| 关键词: 搪塑粉 热降解 升温速率 气氛 热解动力学 |
| DOI：10.11951/j.issn.1005-0299.20140210 |
| 分类号:O631 |
| 基金项目:国家重点基础研究发展计划资助项目(2012CB821505)；山东省自然科学杰出青年基金资助项目(JQ201016). |
|
| Thermal degradation characteristics and kinetics of PVC slush powder |
|
WANG Fei1 , YAO Weiguo2 , GUAN Dongbo2 , WANG Shoujun3 , AN Hui3 , JIA Yuxi1
|
|
(1. Key Laboratory for Liquid-Solid Structural Evolution & Processing of Materials (Ministry of Education), Shandong University, Jinan 250061, China;2. College of Materials Science and Engineering, Jilin University, Changchun 130022, China;3. Changchun Faway-Johnson Controls Automotive Systems Co. Ltd, Changchun 130033, China)
|
| Abstract: |
| Pyrolysis gas chromatography/mass spectrometry is used to analyze the pyrolysis products of PVC slush powder. Combined with thermal gravimetric analysis, the thermal degradation characteristics are studied. The effects of heating rate, atmosphere and slush molding on the process are discussed, and with X-ray fluorescence spectrum, the degradation kinetics is also analyzed. The results indicate that the degradation process of PVC slush powder can be divided into three stages, the first stage is caused by dehydrochlorination of PVC and evaporation of plasticizer. The interaction between PVC and plasticizer makes the process more complicated. Heating rate and atmosphere affects greatly the powder pyrolysis. The stability of the polymer-based skins is improved because plasticizer can act as a protection coating of the PVC macromolecules. The study on the kinetics at the first stage reveals that the activation energy and reaction order are smaller in nitrogen than in oxygen-containing atmosphere. |
| Key words: slush powder thermal degradation heating rate atmosphere degradation kinetics |
