期刊检索

  • 2024年第32卷
  • 2023年第31卷
  • 2022年第30卷
  • 2021年第29卷
  • 2020年第28卷
  • 2019年第27卷
  • 2018年第26卷
  • 2017年第25卷
  • 2016年第24卷
  • 2015年第23卷
  • 2014年第22卷
  • 2013年第21卷
  • 2012年第20卷
  • 2011年第19卷
  • 2010年第18卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 中国材料研究学会
哈尔滨工业大学
主编 苑世剑 国际刊号ISSN 1005-0299 国内刊号CN 23-1345/TB

期刊网站二维码
微信公众号二维码
引用本文:梁成浩,曹彩红,黄乃宝.离子注入Nb不锈钢双极板的耐孔蚀性能研究[J].材料科学与工艺,2014,22(5):19-25.DOI:10.11951/j.issn.1005-0299.20140504.
LIANG Chenghao,CAO Caihong,HUANG Naibao.Research on the pitting corrosion resistance of stainless steel bipolar plates implanted Nb[J].Materials Science and Technology,2014,22(5):19-25.DOI:10.11951/j.issn.1005-0299.20140504.
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1220次   下载 1116 本文二维码信息
码上扫一扫!
分享到: 微信 更多
离子注入Nb不锈钢双极板的耐孔蚀性能研究
梁成浩,曹彩红,黄乃宝
(大连海事大学 交通运输装备与海洋工程学院,大连 116026)
摘要:
为了探索离子注入Nb不锈钢双极板在模拟质子交换膜燃料电池(PEMFC)中的性能,采用极化曲线、恒电位试验和电化学阻抗谱等方法研究了离子注入铌316不锈钢在PEMFC环境中耐孔蚀性能的影响.研究表明:模拟PEMFC环境中316不锈钢和离子注入铌316不锈钢试样均发生孔蚀;Nb离子的注入提高了抗孔蚀性能,且随着介质温度的升高,孔蚀倾向加剧.孔蚀的诱发是离子注入铌316不锈钢表面水解形成Nb(OH)+4,导致钝化膜局部溶解破坏所致.模拟PEMFC环境中316不锈钢表面注入铌层膜电阻Rcoat、电荷转移电阻Rct升高,而注入铌层的电容值Ccoat、双电层电容Cct下降,表明注入铌层成为高电阻、低电容的阻挡层,对基体起到良好的保护作用.
关键词:  316不锈钢双极板    离子注入  质子交换膜燃料电池  孔蚀  极化曲线  电化学阻抗谱
DOI:10.11951/j.issn.1005-0299.20140504
分类号:TG174.3
基金项目:国家自然科学基金资助项目(21276036);中央高校基本科研业务费专项资金资助项目(3132014323).
Research on the pitting corrosion resistance of stainless steel bipolar plates implanted Nb
LIANG Chenghao, CAO Caihong,HUANG Naibao
(Transportation Equipments and Ocean Engineering College, Dalian Maritime University, Dalian 116026, China)
Abstract:
To investigate the characteristics of stainless steel implanted Nb in simulated proton exchange membrane fuel cell (PEMFC) environment, its pitting corrosion resistance was studied by polarization curves, chronoamperometry and electrochemical impedance spectroscopy method. The results indicated that the pitting corrosion appeared on the surface of 316 stainless steel in simulated PEMFC environment whether it was implanted Nb or not. The steel′s pitting corrosion resistance was improved and the pitting corrosion tendency was increased with the increasing of simulated solution temperature after implanted Nb. The pitting corrosion was induced by the partial breakdown of the passive film, which was caused by the hydrolysis formation of Nb(OH)+4 on the 316 stainless steel implanted Nb. At the same time, its film resistance and charge transfer resistance were also improved while its film capacitance and double layer capacitance were decreased in simulated PEMFC environment. The results indicated that the implanted Nb film had been the barrier layer of high resistance and low capacitance, which prevented the matrix steel from corrosion.
Key words:  316 stainless steel bipolar plate  Nb  ion implanting  pitting corrosion  proton exchange membrane fuel cell (PEMFC)  polarization curve  electrochemical impedance spectroscopy

友情链接LINKS