期刊检索

  • 2024年第32卷
  • 2023年第31卷
  • 2022年第30卷
  • 2021年第29卷
  • 2020年第28卷
  • 2019年第27卷
  • 2018年第26卷
  • 2017年第25卷
  • 2016年第24卷
  • 2015年第23卷
  • 2014年第22卷
  • 2013年第21卷
  • 2012年第20卷
  • 2011年第19卷
  • 2010年第18卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 中国材料研究学会
哈尔滨工业大学
主编 苑世剑 国际刊号ISSN 1005-0299 国内刊号CN 23-1345/TB

期刊网站二维码
微信公众号二维码
引用本文:张元杰,马成勇,彭云,杜全斌,陆建生.NM360钢与Q345钢异种钢焊接接头组织与性能研究[J].材料科学与工艺,2014,22(6):73-77.DOI:10.11951/j.issn.1005-0299.20140613.
ZHANG Yuanjie,MA Chengyong,PENG Yun,DU Quanbin,LU Jiansheng.Microstructure and properties of the welding joint between NM360 steel and Q345 steel after MAG[J].Materials Science and Technology,2014,22(6):73-77.DOI:10.11951/j.issn.1005-0299.20140613.
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1423次   下载 1260 本文二维码信息
码上扫一扫!
分享到: 微信 更多
NM360钢与Q345钢异种钢焊接接头组织与性能研究
张元杰1,2,马成勇2,彭云2,杜全斌1,陆建生1
(1.昆明理工大学 材料科学与工程学院,云南 昆明 650093;2.钢铁研究总院 焊接研究所,北京 100081)
摘要:
为了解NM360钢与异种钢焊接应用过程中焊接接头的力学性能,本文对NM360调质钢和Q345热轧钢采用气体保护焊进行异种钢焊接,对焊接接头进行了力学性能试验及微观组织观察,并分析了NM360钢ICHAZ的软化机理.研究表明:Q345热轧钢焊接接头CGHAZ组织为贝氏体+魏氏组织,为HAZ硬度值最高的区域,FGHAZ和ICHAZ组织为P+F;NM360调质钢焊接接头CGHAZ组织为低碳马氏体,FGHAZ组织为低碳马氏体+少量的粒状贝氏体,晶粒细小,为HAZ硬度值最高的区域,ICHAZ组织为回火马氏体+铁素体+粒状贝氏体,铁素体组织是造成ICHAZ硬度值大幅度降低的原因.
关键词:  Q345钢  NM360钢  接头软化  组织  性能
DOI:10.11951/j.issn.1005-0299.20140613
分类号:TG453
基金项目:
Microstructure and properties of the welding joint between NM360 steel and Q345 steel after MAG
ZHANG Yuanjie1,2, MA Chengyong2, PENG Yun2 , DU Quanbin1, LU Jiansheng1
(1.Kunming University of Science and Technology,School of Materials Science and Engineering,Kunming 650093,China; 2.Central Iron and Steel Research Institute ,Beijing 100081 , China)
Abstract:
To understand the mechanical properties of welding joint between NM360 steel and another dissimilar steel, this paper welded NM360 steel and Q345 steel by using GMA and analyzed the welded joints mechanical properties, microstructure, and the ICHAZ softening mechanism. The results show that Q345 steel welded joints CGHAZ organization is bainitic and Wildmanstatten structure which is the highest HAZ hardness values, FGHAZ and ICHAZ organization is P and F; NM360 steel CGHAZ organization of welded joints is low carbon martensitic, FGHAZ organization is low carbon martensitic and a small amount of granular bainite which is HAZ hardness value area of the highest for fine grain, ICHAZ organization is ferrite, granular bainite and tempered martensite, the ferrite makes ICHAZ hardness values significantly reduced.
Key words:  Q345 steel  NM360 steel  joint softenting  microstructure  property

友情链接LINKS