期刊检索

  • 2024年第32卷
  • 2023年第31卷
  • 2022年第30卷
  • 2021年第29卷
  • 2020年第28卷
  • 2019年第27卷
  • 2018年第26卷
  • 2017年第25卷
  • 2016年第24卷
  • 2015年第23卷
  • 2014年第22卷
  • 2013年第21卷
  • 2012年第20卷
  • 2011年第19卷
  • 2010年第18卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 中国材料研究学会
哈尔滨工业大学
主编 苑世剑 国际刊号ISSN 1005-0299 国内刊号CN 23-1345/TB

期刊网站二维码
微信公众号二维码
引用本文:眭凯强,张庆波,刘丽.碳纤维电泳沉积碳纳米管对界面性能的影响[J].材料科学与工艺,2015,23(1):45-50.DOI:10.11951/j.issn.1005-0299.20150108.
SUI Kaiqiang,ZHANG Qingbo,LIU Li.The influence of carbon fiber reinforcement composite by electrophoretic deposition carbon nanotubes on interfacial property of carbon fiber surface[J].Materials Science and Technology,2015,23(1):45-50.DOI:10.11951/j.issn.1005-0299.20150108.
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 2001次   下载 1263 本文二维码信息
码上扫一扫!
分享到: 微信 更多
碳纤维电泳沉积碳纳米管对界面性能的影响
眭凯强,张庆波,刘丽
(哈尔滨工业大学 化工学院,哈尔滨 150001)
摘要:
采用碳纳米管电泳沉积到碳纤维表面,达到改性碳纤维复合材料界面性能的目的.将羧基化的碳纳米管在十六烷基三甲基溴化铵的分散作用下制备成不同浓度的水溶液,在电场作用下,将碳纳米管电泳沉积到碳纤维表面.通过扫描电子显微镜、X-射线光电子能谱以及动态接触角对处理前后的碳纤维的表面形貌、表面元素及浸润性进行表征.研究结果表明,经过电泳沉积碳纳米管后,碳纤维的表面粗糙度、表面极性官能团含量及表面能都有较大提高,纤维的浸润性得到提高.对复合材料的界面性能分析表明,复合材料的界面性能在经过处理后有很大提高,当碳纳米管的质量浓度为0.1%,界面剪切强度提高了72.93%.
关键词:  碳纤维  碳纳米管  电泳沉积  复合材料  界面性能
DOI:10.11951/j.issn.1005-0299.20150108
分类号:V258+.3
基金项目:
The influence of carbon fiber reinforcement composite by electrophoretic deposition carbon nanotubes on interfacial property of carbon fiber surface
SUI Kaiqiang,ZHANG Qingbo,LIU Li
(School of Chemical Engineering & Technology, Harbin Institute of Technology,Harbin 150001,China)
Abstract:
This article aims at improving interface performance of composite by electrophoretic depositing carbon nanotube on carbon fiber. Cetyl trimethyl ammonium bromide is used to fabricate the carboxyl carbon nanotubes solution with different concentration. Under the electric field, the carbon nanotube was deposited onto the surface of carbon fiber. By scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and the Dynamic contact angle, the fiber surface morphology, surface elements and wettability were characterized. The results showed that, after electrophoretic deposition of carbon nanotubes, the surface roughness, number of polar groups and surface energy of carbon fiber increased significantly, which were the main reasons for improving the wettability between the carbon fiber and epoxy resin. The interfacial shear stress (IFSS) increased to 72.93% when the concentration of carbon nanotubes was 0.1%.
Key words:  carbon fiber  carbon nanotube  electrophoretic deposition  composite  interfacial property

友情链接LINKS