期刊检索

  • 2024年第32卷
  • 2023年第31卷
  • 2022年第30卷
  • 2021年第29卷
  • 2020年第28卷
  • 2019年第27卷
  • 2018年第26卷
  • 2017年第25卷
  • 2016年第24卷
  • 2015年第23卷
  • 2014年第22卷
  • 2013年第21卷
  • 2012年第20卷
  • 2011年第19卷
  • 2010年第18卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 中国材料研究学会
哈尔滨工业大学
主编 苑世剑 国际刊号ISSN 1005-0299 国内刊号CN 23-1345/TB

期刊网站二维码
微信公众号二维码
引用本文:傅颖怡,丁新更,孟成,窦天军,杨辉.SiO2/TiO2复合气凝胶的孔道结构研究[J].材料科学与工艺,2015,23(2):1-7.DOI:10.11951/j.issn.1005-0299.20150201.
FU Yingyi,DING Xingeng,MENG Cheng,DOU Tianjun,YANG Hui.Synthesis and pore structure of porous SiO2/TiO2 composite aerogel[J].Materials Science and Technology,2015,23(2):1-7.DOI:10.11951/j.issn.1005-0299.20150201.
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1786次   下载 1281 本文二维码信息
码上扫一扫!
分享到: 微信 更多
SiO2/TiO2复合气凝胶的孔道结构研究
傅颖怡1 ,丁新更1 ,孟成1 ,窦天军2,杨辉1
(1.浙江大学 材料科学与工程无机所,杭州310027; 2.中国工程物理研究院,四川 绵阳621900)
摘要:
为了在常压干燥下制备高比表面积且具有多级孔道结构的SiO2/TiO2复合气凝胶,以正硅酸乙酯、钛酸丁酯为原料,利用低聚体聚合将分相平行引入到溶胶凝胶过程中,获得SiO2/TiO2醇凝胶,并通过溶剂替换技术实现气凝胶的常压干燥制备.不同硅钛比气凝胶的内部结构研究表明:合成的气凝胶是由纳米SiO2和TiO2颗粒分散复合而成的介孔块体,其中Ti—O—Ti、Si—O—Si和Ti—O—Si键相互交织.气凝胶的结构变化是分相与溶胶凝胶过程相互竞争的结果.Si含量能显著改善气凝胶的结构,当n(Ti)n(Si)为31时,比表面积高达712.2 m2/g,平均孔径为3.36 nm;当n(Ti)n(Si)为1.51时,复合气凝胶具有明显双连续孔道,比表面积高,同时孔状结构清晰.
关键词:  常压干燥  SiO2/TiO2气凝胶  硅钛比  组织结构  溶胶凝胶  分相法
DOI:10.11951/j.issn.1005-0299.20150201
分类号:O648
基金项目:
Synthesis and pore structure of porous SiO2/TiO2 composite aerogel
FU Yingyi1, DING Xingeng1, MENG Cheng1, DOU Tianjun2, YANG Hui1
(1.Department of Materials Science and Engineering, Zhejiang University, Hangzhou 310027,China; 2.China Academy of Engineering Physics, Mianyang 621900,China)
Abstract:
In order to prepare SiO2/TiO2 composite aerogels with high specific surface area and multi-level pore structure under ambient pressure drying, the porous SiO2/TiO2 gel was synthesized via sol-gel process with phase separation using TEOS and TnBT as raw materials. Using the solvent replacement technique, SiO2/TiO2 aerogels were prepared via a drying process at ambient pressure. The effects of silicon titanium content on microstructure were investigated. The as-prepared SiO2/TiO2 aerogel is a composite mesoporous solid bulk formed by dispersed nano-SiO2 and TiO2 particles Ti—O—Ti bonds, Si—O—Si bonds and Ti—O—Si bonds are intertwined in this SiO2/TiO2 aerogel , which make composite aerogels have smaller crystal size, higher specific surface area and better thermal stability. Structure change of the composite aerogel is the result of competition between split phase process and sol-gel process essentially. Proper silicon content can refine the structure TiO2/SiO2 composite aerogels dramatically. The prepared SiO2/TiO2 aerogels with a mole ratio n(Ti)n(Si) = 31, have high specific surface area of 712.2 m2/g and small pore diameter of 3.36 nm. When mole ratio n(Ti)n(Si)=1.51, the prepared SiO2/TiO2 aerogels not only have double continuous channel structure, high specific surface area ,but also clear pore structure.
Key words:  drying process at ambient pressure  SiO2/TiO2 composite aerogel  mole ratio n(Ti)n(Si)  microstructure  sol-gel  phase-separation

友情链接LINKS