期刊检索

  • 2024年第32卷
  • 2023年第31卷
  • 2022年第30卷
  • 2021年第29卷
  • 2020年第28卷
  • 2019年第27卷
  • 2018年第26卷
  • 2017年第25卷
  • 2016年第24卷
  • 2015年第23卷
  • 2014年第22卷
  • 2013年第21卷
  • 2012年第20卷
  • 2011年第19卷
  • 2010年第18卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 中国材料研究学会
哈尔滨工业大学
主编 苑世剑 国际刊号ISSN 1005-0299 国内刊号CN 23-1345/TB

期刊网站二维码
微信公众号二维码
引用本文:丁志敏,付能,冯锐.珠光体对ZG120Mn13钢拉伸断裂过程的影响[J].材料科学与工艺,2015,23(4):54-58.DOI:10.11951/j.issn.1005-0299.20150409.
DING Zhimin,FU Neng,FENG Rui.Effect of pearlite on the tensile fracture process of ZG120Mn13 steel[J].Materials Science and Technology,2015,23(4):54-58.DOI:10.11951/j.issn.1005-0299.20150409.
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1374次   下载 1123 本文二维码信息
码上扫一扫!
分享到: 微信 更多
珠光体对ZG120Mn13钢拉伸断裂过程的影响
丁志敏,付能,冯锐
(大连交通大学 材料科学与工程学院,大连 116028)
摘要:
为探究珠光体降低高碳高锰钢机械性能的原因,本文采用金相组织分析、机械性能测试和断口微观形貌分析等实验方法,研究了奥氏体基体上含体积分数23%珠光体的ZG120Mn13高碳高锰钢的拉伸性能及其裂纹形核和扩展过程.结果表明:通过时效处理,在奥氏体基体上析出的条状、颗粒状以及沿晶界连续分布的珠光体将使ZG120Mn13钢的强度和塑性大幅度下降.机械性能的降低与其力学行为有关,当基体为单一奥氏体时,裂纹将在大量孪生变形后,在孪晶界、孪晶与晶界交界处形核,并沿孪晶界长大而相互连接、扩展.而奥氏体基体上存在珠光体时,裂纹主要在珠光体团内形核,并通过相邻珠光体间奥氏体的塑性耗竭、切断而得以扩展.
关键词:  高碳高锰钢  时效处理  组织结构  珠光体  机械性能  裂纹形核及其扩展
DOI:10.11951/j.issn.1005-0299.20150409
分类号:TG113
基金项目:铁道部科技研究开发计划项目(2012G011-D);辽宁省高等学校优秀人才支持计划(LR2012014);大连市科技计划项目(2013A16GX119).
Effect of pearlite on the tensile fracture process of ZG120Mn13 steel
DING Zhimin, FU Neng, FENG Rui
(College of Materials Science and Engineering, Dalian Jiaotong University, Dalian 116028, China)
Abstract:
To investigate the reason why pearlite on austenite matrix of Hadfield steel would reduce its mechanical properties, the effect of pearlite on the tensile properties, crack nucleation and propagation process of ZG120Mn13 steel which contains volume fraction of 23% pearlite, was studied by metallography analysis, mechanical property testing and fracture morphology analysis. The strength and ductility of ZG120Mn13 steel can be decreased by the aging treatment that produced the pearlite colonies with the strips and granular-like,or continuously along grain boundaries of the austenites. The strength and ductility of the steel sharply decrease because of pearlite. The decrement of mechanical properties is related to the crack nucleation and propagation process during the deformation and fracture of the steel. When the steel is a single-phase austenite, the cracks nucleate mainly at twin boundaries, or junctions between twins and grain boundaries after a large number of twinning deformation, then grow up along twin boundaries and connected with each other. Whereas, when there are pearlite colonies on the austenite matrix, cracks nucleated mainly in the pearlite colonies, and these cracks were expanded even to rupture by plastic deformation and fracture of austenite between adjacent pearlite colonies.
Key words:  Hadfield steel  aging treatment  microstructure  pearlite  mechanical property  nucleation and development of crack

友情链接LINKS