期刊检索

  • 2024年第32卷
  • 2023年第31卷
  • 2022年第30卷
  • 2021年第29卷
  • 2020年第28卷
  • 2019年第27卷
  • 2018年第26卷
  • 2017年第25卷
  • 2016年第24卷
  • 2015年第23卷
  • 2014年第22卷
  • 2013年第21卷
  • 2012年第20卷
  • 2011年第19卷
  • 2010年第18卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 中国材料研究学会
哈尔滨工业大学
主编 苑世剑 国际刊号ISSN 1005-0299 国内刊号CN 23-1345/TB

期刊网站二维码
微信公众号二维码
引用本文:陈树军,刘凯,吕庆.不同配比下PMC矿粉和司家营矿粉造球工艺试验研究[J].材料科学与工艺,2016,24(6):85-89.DOI:10.11951/j.issn.1005-0299.20160615.
CHEN Shujun,LIU Kai,LÜ Qing.Experimental study on the pelletizing with PMC and sijiaying ore mineral powder under different ratio[J].Materials Science and Technology,2016,24(6):85-89.DOI:10.11951/j.issn.1005-0299.20160615.
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1286次   下载 1176 本文二维码信息
码上扫一扫!
分享到: 微信 更多
不同配比下PMC矿粉和司家营矿粉造球工艺试验研究
陈树军1,刘凯2,吕庆2
(1.东北大学 材料与冶金学院,沈阳 110004; 2.华北理工大学 冶金与能源学院,教育部现代 冶金技术重点实验室,河北 唐山 063009)
摘要:
为了确定PMC矿粉和司家营矿粉两种矿粉造球的最佳配比,利用实验室的球团设备对两种矿粉在不同配比下的球团工艺进行了试验研究.研究发现,在PMC矿粉:司家营矿粉=8:2的配比下,生球的成球率为91%,落下强度为4.15次/0.5 m个,抗压强度为0.825 dN,爆裂温度为440 ℃;成品球团的抗压强度接近300 dN,并且通过对PMC矿粉:司家营矿粉=8:2时成品球团矿的显微结构的观察发现,此配比下的球团矿矿相以赤铁矿为主,晶粒分布密集且联结成片,成品球团矿的抗压强度最高.因此,PMC矿粉:司家营矿粉=8:2时为最优方案.
关键词:  PMC矿粉  司家营矿粉  矿粉配比  球团试验
DOI:10.11951/j.issn.1005-0299.20160615
分类号:TF521
文献标识码:A
基金项目:国家自然科学基金资助项目(U1360205).
Experimental study on the pelletizing with PMC and sijiaying ore mineral powder under different ratio
CHEN Shujun1,LIU Kai2, Lü Qing2
(1.School of Materials andMetallurgy,Northeastern University,Shengyang 110004, China; 2.Key Laboratory for Advanced Metallurgy Technology, College of Metallurgy & Energy,North China University of Science and Technology, Ministry of Education, Tangshan 063009, China)
Abstract:
In order to get the best proportion of PMC (Palabora Mining Co.) ore mineral powders and Sijiaying mineral powders for pelletizing, investigation was conducted on pelletizing with the two kinds of mineral powders. The results show that, the rate of ball production is 91%, drop strength is 4.15 times /0.5 m per ball, the compressive strength of green ball is 0.825 dN, explosion temperature is 440 ℃ and the compressive strength of roasted ball is about 300 dN, under the ratio of PMC:Sijiaying=8:2, which can meet the production requirements. Besides, through the observation of its microstructure, it shows that under the ratio of PMC:Sijiaying=8:2, the main mineral phase of roasted ball is hematite pellet, state of which is intensive and connecting into piece, so the compressive strength is the highest, hence the ratio of PMC:Sijiaying=8:2 is the best ratio to pelletize with the two kinds of mineral powders.
Key words:  PMC ore mineral powders  sijiaying mineral powder  the ratio of the powders  pelletizing tests

友情链接LINKS