| 引用本文: | 张凯,刘郁丽,杨合.抽芯对H96薄壁矩形波导管绕弯成形回弹的影响[J].材料科学与工艺,2013,21(1):56-61.DOI:10.11951/j.issn.1005-0299.20130110. |
| ZHANG Kai,LIU Yu-li,YANG He.Influence of retracting mandrel on springback of H96thin-walled rectangular wave-guide tube in rotary draw bending process[J].Materials Science and Technology,2013,21(1):56-61.DOI:10.11951/j.issn.1005-0299.20130110. |
|
| 摘要: |
| 基于ABAQUS软件平台,建立了考虑弹性模量变化的H96薄壁矩形管绕弯回弹预测模型,模拟研究了考虑弹性模量随塑性变形的变化和不考虑弹性模量变化对回弹预测精度的影响,并试验验证了模型的可靠性.基于所建模型,模拟研究了抽芯参数对H96黄铜薄壁矩形管绕弯成形回弹角的影响规律及抽芯前后截面尺寸的变化规律.结果表明:采用变弹性模量的回弹预测模型可有效提高回弹预测精度14.9%；随着芯棒与管坯摩擦系数增大,回弹角减小；抽芯次数增加,回弹角先减小后趋于稳定；抽芯速度增大,回弹角先减小后趋于稳定；抽芯后的截面回弹有助于使各截面变化量趋于均匀. |
| 关键词: H96薄壁矩形波导管 弹性模量 抽芯 回弹角 截面尺寸 |
| DOI：10.11951/j.issn.1005-0299.20130110 |
| 分类号: |
| 基金项目:国家自然科学基金资助项目(50975235)；“111”引智计划资助项目(B08040). |
|
| Influence of retracting mandrel on springback of H96thin-walled rectangular wave-guide tube in rotary draw bending process |
|
ZHANG Kai,LIU Yu-li,YANG He
|
|
(State Key Laboratory of Solidification Processing,Northwestern Polytechnical University,Xi′an710072,China)
|
| Abstract: |
| Based on the platform of ABAQUS,a springback prediction model of rotary draw bending of H96thin-walled rectangular tube is established considering the variation of Young’s modulus.Then a research of the effect of variation of Young’s modulus on prediction precision of springback is carried out and the reliability of the model is validated experimentally.The influence of retracting mandrel parameters on springback angle of rotary draw bending for H96thin -walled rectangular tube and the variation rules of cross section dimension after retracting mandrel have been studied.The results show that the prediction precision of springback has been raised 14.9% effectively by the consideration of the variation of Young’s modulus versus plastic strain.Besides,the springback angle decreased with the increase of the friction coefficient between mandrel and tube;However,with the increase of mandrel retracting times and mandrel retracting speed,the springback angle decreased first,then stabilized;The springback of cross section dimension after retracting mandrel made the cross section deformation tend to be more uniform. |
| Key words: H96thin-walled rectangular wave-guide tube Young′s modulus mandrel retracting springback cross section dimension |
