| 引用本文: | 齐延兵,林俊峰,苏海波,陈新平,刘钢.冲头形状对液压冲孔塌陷的影响[J].材料科学与工艺,2013,21(1):62-66.DOI:10.11951/j.issn.1005-0299.20130111. |
| QI Yan-bing,LIN Jun-feng,SU Hai-bo,CHEN Xin-ping,LIU Gang.Influence of punch shape on rollover of hydropiercing[J].Materials Science and Technology,2013,21(1):62-66.DOI:10.11951/j.issn.1005-0299.20130111. |
|
| 摘要: |
| 为了研究管材液压冲孔中冲头形状对塌陷的影响规律,采用7种不同形状的冲头进行了液压冲孔实验,分析了冲头形状对液压冲孔质量的影响.实验结果表明:塌陷深度随着冲头端面倾斜角度的增大而减小,随着冲头圆角的增大而增大.提高内压能够降低塌陷深度,塌陷深度随着管内压力的增大而减小.不同形状冲头对塌陷的影响不同,斜冲头冲孔后塌陷较小,圆角冲头冲孔后塌陷较大. |
| 关键词: 液压冲孔 液压成形 管材 塌陷 冲头 汽车零部件 |
| DOI：10.11951/j.issn.1005-0299.20130111 |
| 分类号: |
| 基金项目:宝钢股份研究院和中央高校基本科研业务费专项资金资助(HIT.BRET1.2010010). |
|
| Influence of punch shape on rollover of hydropiercing |
|
QI Yan-bing1,LIN Jun-feng1,SU Hai-bo2,CHEN Xin-ping2,LIU Gang1
|
|
(1.National Key Laboratory for Precision Heat Processing of Metals,Harbin Institute of Technology,Harbin 150001,China;;2.Baoshan Iron and Steel Co.,Ltd.,Shanghai 201900,China)
|
| Abstract: |
| To investigate the influence of punch shape on collapse of hydropiercing,seven different shapes of the punch were designed for the hydropiercing experiment,and the influence was analyzed.The results show that,with the increasing of the punch face angle,the collapse depth decreases,and with the increasing of the punch round,the collapse depth increases.Increasing the internal pressure can reduce the collapse depth.The influence of different punch on collapse was dissimilar.The collapse depth for the punch with sloping end face was smaller,while that for the punch with fillet was larger. |
| Key words: hydropiercing hydroforming tube collapse punch auto parts |
