期刊检索

  • 2024年第32卷
  • 2023年第31卷
  • 2022年第30卷
  • 2021年第29卷
  • 2020年第28卷
  • 2019年第27卷
  • 2018年第26卷
  • 2017年第25卷
  • 2016年第24卷
  • 2015年第23卷
  • 2014年第22卷
  • 2013年第21卷
  • 2012年第20卷
  • 2011年第19卷
  • 2010年第18卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 中国材料研究学会
哈尔滨工业大学
主编 苑世剑 国际刊号ISSN 1005-0299 国内刊号CN 23-1345/TB

期刊网站二维码
微信公众号二维码
引用本文:罗云烽,杨喆,肈研,谢富原.上浆剂对国产T700级碳纤维复合材料界面性能的影响[J].材料科学与工艺,2014,22(4):61-66.DOI:10.11951/j.issn.1005-0299.20140411.
LUO Yunfeng,YANG Zhe,ZHAO Yan,XIE Fuyuan.Effects of sizing agent on interphase property of domestic T700-grade carbon fiber composites[J].Materials Science and Technology,2014,22(4):61-66.DOI:10.11951/j.issn.1005-0299.20140411.
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1406次   下载 1527 本文二维码信息
码上扫一扫!
分享到: 微信 更多
上浆剂对国产T700级碳纤维复合材料界面性能的影响
罗云烽1,杨喆2,肈研2,谢富原1
(1.中航复合材料有限责任公司,北京 101300;2. 北京航空航天大学 材料科学与工程学院,北京 100191)
摘要:
采用扫描电镜(SEM)、原子力显微镜(AFM)、X射线光电子能谱(XPS)等测试方法表征了上浆/未上浆国产T700级(MT700)碳纤维的表面特性,并通过单丝断裂实验测试了单丝复合体系微观界面剪切强度(IFSS),在此基础上研究了碳纤维表面特性对单丝复合体系微观界面性能及其耐湿热性能的影响.研究表明:MT700碳纤维表面上浆剂改善了纤维/基体微观界面强度及其耐湿热性能;湿热环境对复合材料的微观界面性能影响显著,尤其是造成纤维/基体间的化学键合作用破坏,去湿后部分界面性能可恢复.
关键词:  复合材料  碳纤维  单丝断裂测试  界面  上浆剂  湿热
DOI:10.11951/j.issn.1005-0299.20140411
分类号:TQ327.3
基金项目:
Effects of sizing agent on interphase property of domestic T700-grade carbon fiber composites
LUO Yunfeng 1, YANG Zhe 2, ZHAO Yan 2, XIE Fuyuan 1
(1. AVIC Composite Corporation Ltd, Beijing 101300,China; 2. School of Materials Science and Engineering, BeiHang University, Beijing 100191,China)
Abstract:
The surface properties of domestic T700-grade(MT700) carbon fiber with sizing or without sizing were characterized by using Scanning Electron Microscope(SEM), Atomic Force Microscope(AFM) and X-ray Photoelectron Spectroscopy(XPS),and the micro-interface shear strength(IFSS) of single fiber composites was also analyzed by Single Fiber Fragmentation Test(SFFT). And the influences of surface properties on micro-interphase strength of single carbon fiber composites and hygrothermal properties were investigated. The results showed that the sizing on the MT700 carbon fibers improved the interphase strength between fibers and matrix and the hygrothermal properties. In addition, the hygrothermal environments dramatically decreased the micro-interphase strength, especially damaged the chemical bond force on the interphase, but a part of lost interphase properties could come round after humidity desorption.
Key words:  composite  carbon fiber  single fiber fragmentation test  interphase  sizing  hygrothermal

友情链接LINKS