期刊检索

  • 2024年第32卷
  • 2023年第31卷
  • 2022年第30卷
  • 2021年第29卷
  • 2020年第28卷
  • 2019年第27卷
  • 2018年第26卷
  • 2017年第25卷
  • 2016年第24卷
  • 2015年第23卷
  • 2014年第22卷
  • 2013年第21卷
  • 2012年第20卷
  • 2011年第19卷
  • 2010年第18卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 中国材料研究学会
哈尔滨工业大学
主编 苑世剑 国际刊号ISSN 1005-0299 国内刊号CN 23-1345/TB

期刊网站二维码
微信公众号二维码
引用本文:常钧,余鑫,尚小朋,赵九野.不同水灰比下无水硫铝酸钙的水化反应[J].材料科学与工艺,2016,24(1):75-79.DOI:10.11951/j.issn.1005-0299.20160112.
CHANG Jun,YU Xin,SHANG Xiaopeng,ZHAO Jiuye.Hydration of calcium sulphoaluminate at different water/solid ratios[J].Materials Science and Technology,2016,24(1):75-79.DOI:10.11951/j.issn.1005-0299.20160112.
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 2220次   下载 1470 本文二维码信息
码上扫一扫!
分享到: 微信 更多
不同水灰比下无水硫铝酸钙的水化反应
常钧,余鑫,尚小朋,赵九野
(大连理工大学 土木工程学院,辽宁 大连 116024)
摘要:
为澄清无水硫铝酸钙的水化反应机理,利用化学试剂CaCO3、Al2O3、CaSO4合成纯度达90%以上的无水硫铝酸钙(C4A3?)单矿物,研究其在水灰比为0.3、05、0.7条件下的水化反应,包括不同水化时间的水化产物及变化规律,用X射线衍射仪、综合热分析仪和扫描电子显微镜对水化产物进行分析.结果表明:水化产物为含不同摩尔结晶水的2种单硫型水化硫铝酸钙C4A?H12(AFm-12)和C4A?H14(AFm-14)以及无定形状态的铝凝胶(AH3),整个水化过程未生成钙矾石(AFt);随着水化时间的延长,C4A?H12(AFm-12)会逐渐转化为C4A?H14(AFm-14);水化反应主要集中发生在3~12 h,后期C4A?H14晶体不断长大.
关键词:  无水硫铝酸钙  水化反应  水化产物  单硫型水化硫铝酸钙  微观形貌
DOI:10.11951/j.issn.1005-0299.20160112
分类号:TQ172.1
文献标识码:A
基金项目:国家自然科学基金资助项目(51472041).
Hydration of calcium sulphoaluminate at different water/solid ratios
CHANG Jun, YU Xin, SHANG Xiaopeng, ZHAO Jiuye
(School of Civil Engineering, Dalian University of Technology, Dalian 116024, China)
Abstract:
Calcium sulphoaluminate (C4A3?) with high purity (> 90%) was synthesized from CaCO3, Al2O3 and CaSO4, and the hydration of C4A3?, including hydration products and their evolution at different hydration time, was investigated at different water/solid ratios (mw/ms=0.3, 0.5, 0.7), aiming to clarify the hydration mechanism. The hydration products were examined by means of X-ray diffraction, differential scanning calorimetry-thermogravimetry and scanning electron microscope. There are two kinds of calcium monosulphoaluminate, namely, C4A?H14 and C4A?H12, and amorphous aluminium gel (AH3), while there is no ettringite (AFt) in the hydration products. C4A?H12 gradually converts to C4A?H14 as the extension of hydration duration. The hydration reaction mainly occurs between 3 and 12 hours after mixed with water. The crystals of C4A?H14 grow larger in later period.
Key words:  calcium sulphoaluminate  hydration reaction  hydration product  calcium monosulphoaluminate  microtopography

友情链接LINKS