期刊检索

  • 2019年第27卷
  • 2018年第26卷
  • 2017年第25卷
  • 2016年第24卷
  • 2015年第23卷
  • 2014年第22卷
  • 2013年第21卷
  • 2012年第20卷
  • 2011年第19卷
  • 2010年第18卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 中国材料研究学会
哈尔滨工业大学
主编 苑世剑 国际刊号ISSN 1005-0299 国内刊号CN 23-1345/TB

期刊网站二维码
微信公众号二维码
引用本文:王建磊,王栋平,王晓虎,贾谦,陈润霖,崔亚辉.基于金相组织调控的锡基巴氏合金B83性能改进[J].材料科学与工艺,2018,26(5):89-96.DOI:10.11951/j.issn.1005-0299.20170368.
WANG Jianlei,WANG Dongping,WANG Xiaohu,JIA Qian,CHEN Runlin,CUI Yahui.Property improvement of tin-based Babbitt B83 based on metallography control[J].Materials Science and Technology,2018,26(5):89-96.DOI:10.11951/j.issn.1005-0299.20170368.
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 209次   下载 453 本文二维码信息
码上扫一扫!
分享到: 微信 更多
基于金相组织调控的锡基巴氏合金B83性能改进
王建磊1, 王栋平1, 王晓虎1, 贾谦2, 陈润霖1, 崔亚辉1
(1.西安理工大学 机械与精密仪器工程学院,西安 710048;2.现代设计及转子轴承系统教育部重点实验室(西安交通大学),西安 710049)
摘要:
为提高滑动轴承巴氏合金层的性能,满足旋转机械高速、重载和高可靠性发展的需要,促进高端滑动轴承产品的研发,本文针对锡基巴氏合金B83进行了性能改进研究.根据B83的金相组织模型,分析金相特征与其力学、摩擦学性能之间的特殊联系,设计了在B83中加入微量的Ag(1%、3%)及石墨(1%)调整金相组织特征,进而改善其力学和摩擦学性能的技术路线,并以布氏硬度、抗压强度、摩擦系数及磨损量4个指标对B83改进前后的性能进行了对比.研究结果表明:添加微量的Ag和石墨均可以促进B83中硬质点的细化和均布,这对提高B83的力学和摩擦学性能有益,特别是添加1%Ag后B83的高温硬度获得了显著提高,而添加微量石墨使B83具有一定的自润滑性,干摩擦系数更加稳定.加入1%Ag后巴氏合金B83的使用性能得到明显提升,更适用于高速电主轴及微型燃气轮机轴承.
关键词:  滑动轴承  金相组织  锡基巴氏合金  力学性能  摩擦学性能
DOI:10.11951/j.issn.1005-0299.20170368
分类号:TG135+.6
文献标识码:A
基金项目:西安理工大学科技创新计划项目(2014CX006).
Property improvement of tin-based Babbitt B83 based on metallography control
WANG Jianlei1, WANG Dongping1, WANG Xiaohu1, JIA Qian2, CHEN Runlin1, CUI Yahui1
(1. School of Mechanical and Precision Instrument Engineering, Xi'an University of Technology, Xi'an 710048, China; 2. Key Laboratory of Education Ministry for Modem Design and Rotor-bearing System(Xi'an Jiaotong University), Xi'an 710049,China)
Abstract:
In order to improve the properties of Babbitt layer, meet the requirements of rotating machinery, and further promote the development of high-end sliding bearing, the properties of tin-based Babbitt B83 were researched. According to the model of metallographic structure of B83, the special relations between metallographic features and mechanical and tribological properties were analyzed. The improvement method based on metallography control was designed by adding trace Ag (1%, 3%) and Graphite (1%) into molten B83, and four indexes (including Brinell hardness, compressive strength, friction coefficient and wear loss) were compared between B83 and improved B83. The research results indicate that adding trace Ag and Graphite into B83 both promoted refinement and uniform distribution of hard particles of B83, which is beneficial to the improvement of mechanical and tribological properties of B83, especially adding 1%Ag makes high temperature hardness improve remarkably, while adding trace graphite makes Babbitt have certain self-lubrication and friction coefficient more stable. Both mechanical and tribological properties of B83 adding 1%Ag were improved remarkably, which is more suitable for bearing of high-speed motorized spindle and micro gas turbine.
Key words:  metallographic structure  Tin-based Babbitt  mechanical properties  tribological properties  sliding bearing

友情链接LINKS