| 引用本文: | 韩向楠,亓海全,王为民,刘阳,李天然,刘安奇,郭春城,秦翔智.不同Mo含量对Al-Mg合金轧板微观组织和短时高温力学性能的影响[J].材料科学与工艺,2024,32(3):69-77.DOI:10.11951/j.issn.1005-0299.20220384. |
| HAN Xiangnan,QI Haiquan,WANG Weimin,LIU Yang,LI Tianran,LIU Anqi,GUO Chuncheng,QIN Xiangzhi.Effect of different Mo contents on microstructure and short-time high-temperature mechanical properties of Al-Mg alloy rolled plates[J].Materials Science and Technology,2024,32(3):69-77.DOI:10.11951/j.issn.1005-0299.20220384. |
|
| |
|
|
| 本文已被：浏览 1844次 下载 2756次 |
码上扫一扫！ |
|
|
| 不同Mo含量对Al-Mg合金轧板微观组织和短时高温力学性能的影响 |
|
韩向楠1,亓海全1,王为民1,刘阳1,李天然1,刘安奇1,郭春城1,秦翔智2
|
|
(1.桂林理工大学 材料科学与工程学院,广西 桂林 541000;2.昆山晶微新材料研究院有限公司,江苏 昆山 215313)
|
|
| 摘要: |
| 基于高强度耐火Al-Mg合金开发需求,设计并制备了6种Mo含量(质量分数)的Al-Mg合金,经变形热处理获得H3xx态轧板,结合光学显微镜、X射线衍射仪、拉伸试验机、带有能谱仪(EDS)的蔡司扫描电镜(SEM)等表征设备对各合金轧板微观组织和短时高温力学性能进行检测分析,揭示了微量Mo对Al-Mg合金的强韧化机理。结果表明:Mo合金化H3xx态Al-Mg合金具有较高的力学性能,这主要归功于与铝基体呈半共格关系的Al12Mo弥散相起到的弥散强化效果和抑制再结晶作用,但过量的Mo易使Al-Mg合金形成较高Mg固溶度的难熔Al12Mo结晶相,不利于合金性能提升。Al12Mo弥散相具有一定的高温稳定性,高温状态下显著阻碍再结晶晶粒长大,进而提高Al-Mg合金高温性能。Mo含量为0.08%时的高温性能最佳,高温强度最大提升22.5%。随着Mo含量的增加,Al-Mg合金常温力学性能和短时高温力学性能都有所提高。 |
| 关键词: Al-Mg合金 Mo合金化 显微组织 第二相 高温强度 |
| DOI：10.11951/j.issn.1005-0299.20220384 |
| 分类号:TG14;TU541 |
| 文献标识码:A |
| 基金项目: |
|
| Effect of different Mo contents on microstructure and short-time high-temperature mechanical properties of Al-Mg alloy rolled plates |
|
HAN Xiangnan1, QI Haiquan1, WANG Weimin1, LIU Yang1, LI Tianran1, LIU Anqi1, GUO Chuncheng1, QIN Xiangzhi2
|
|
(1.School of Materials Science and Engineering, Guilin University of Technology, Guilin 541000, China;2.Kunshan Crystal Micro New Materials Research Institute Co., Ltd., Kunshan 215313, China)
|
| Abstract: |
| Based on the demand for the development of high-strength refractory Al-Mg alloys, Al-Mg alloys with different Mo contents of 0%, 0.08%, 0.17%, 0.37%, 0.53% and 0.86% by mass were designed and prepared, and H3xx rolled plates were obtained by deformation heat treatment. The microstructure and short-time high-temperature mechanical properties of the rolled plates were examined and analyzed by combining optical microscopy, X-ray diffractometer, tensile testing machine, Zeiss Gemini 300 with energy spectrometer (EDS) and other characterization equipment to reveal the strengthening and toughening mechanism of Al-Mg alloys in relation to trace Mo. The results show that the Mo alloyed H3xx Al-Mg alloy exhibits higher mechanical properties mainly attributed to the diffusion strengthening effect and recrystallization inhibition effect of Al12Mo dispersion phase presenting a semi-coherent relationship with aluminum matrix. However, excessive Mo tends to form refractory Al12Mo crystal phase with higher Mg solid solubility inconducive to the improvement of the alloy properties. Al12Mo dispersive phase shows certain stability at high temperature, with the recrystallization grain growth significantly hindered at high temperature, thus improving the high temperature performance of Al-Mg alloy. When Mo content is 0.08%, the high temperature performance is the best, and the high temperature strength increases by 22.5%. Compared with Al-Mg alloy without Mo addition, the mechanical properties at room temperature and short-term high temperature are improved. |
| Key words: Al-Mg alloy Mo alloying microstructure second phase high temperature strength |
|
|
|
|
