| 引用本文: | 王明道,姜宁,赵新涛,李骏腾.纤维增强热塑性树脂基复合材料固相复合成型工艺研究进展[J].材料科学与工艺,2024,32(4):95-110.DOI:10.11951/j.issn.1005-0299.20220403. |
| WANG Mingdao,JIANG Ning,ZHAO Xintao,LI Junteng.Progress on solid phase blended molding technology of fiber reinforced thermoplastic composites[J].Materials Science and Technology,2024,32(4):95-110.DOI:10.11951/j.issn.1005-0299.20220403. |
|
| 摘要: |
| 纤维增强热塑性树脂基复合材料具有比强度比模量高、结构可设计等优点,广泛应用于汽车、航空航天等领域。本文综述了国内外纤维增强热塑性复合材料固相复合成型工艺的研究现状,分析了不同固相复合成型工艺的成型过程与原理,总结了所制备复合材料的微观结构、力学性能等特点,阐述了此类工艺存在的问题和挑战,并对固相复合工艺的研究方向和发展趋势进行了展望。 |
| 关键词: 固相复合 复合材料 热塑性树脂 纤维浸润 成型工艺 |
| DOI：10.11951/j.issn.1005-0299.20220403 |
| 分类号:TB332 |
| 文献标识码:A |
| 基金项目:中国博士后基金项目(2021M691853)；山东省自然科学基金资助项目(ZR2020QA040). |
|
| Progress on solid phase blended molding technology of fiber reinforced thermoplastic composites |
|
WANG Mingdao1, JIANG Ning1, ZHAO Xintao1, LI Junteng2
|
|
(1.School of Transportation and Vehicle Engineering, Shandong University of Technology, Zibo 255000, China; 2.School of Mechanical Engineering, Shandong University of Technology, Zibo 255000, China)
|
| Abstract: |
| Fiber reinforced thermoplastic composites are widely used in automotive, aerospace and other fields due to high specific strength/modulus and designable structure. This paper presents a literature review on the recent research and development of solid phase blended molding technology. The process and principle of different solid phase blended molding technologies were analyzed. The microstructure and mechanical properties by different molding methods were summarized. The problems and challenges of solid phase blended molding technology were also discussed. Finally, the research direction of solid phase blended molding technology was prospected, hopefully to provide a fresh insight into the development of related theoretical research, process design, and industrial application. |
| Key words: solid phase blending composites thermoplastic resin fiber infiltration forming process |
