期刊检索

  • 2024年第56卷
  • 2023年第55卷
  • 2022年第54卷
  • 2021年第53卷
  • 2020年第52卷
  • 2019年第51卷
  • 2018年第50卷
  • 2017年第49卷
  • 2016年第48卷
  • 2015年第47卷
  • 2014年第46卷
  • 2013年第45卷
  • 2012年第44卷
  • 2011年第43卷
  • 2010年第42卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 哈尔滨工业大学 主编 李隆球 国际刊号ISSN 0367-6234 国内刊号CN 23-1235/T

期刊网站二维码
微信公众号二维码
引用本文:刘晓,王连广,王兵.钢管钢骨高强混凝土抗弯构件试验研究[J].哈尔滨工业大学学报,2010,42(10):1651.DOI:10.11918/j.issn.0367-6234.2010.10.028
LIU Xiao,WANG Lian-guang,WANG Bing.Flexural members of steel tube filled with steel-reinforced high-strength concrete[J].Journal of Harbin Institute of Technology,2010,42(10):1651.DOI:10.11918/j.issn.0367-6234.2010.10.028
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
过刊浏览    高级检索
本文已被:浏览 1276次   下载 803 本文二维码信息
码上扫一扫!
分享到: 微信 更多
钢管钢骨高强混凝土抗弯构件试验研究
刘晓1,2, 王连广1, 王兵2
1.东北大学资源与土木学院;2.沈阳大学建筑工程学院
摘要:
为了研究钢管钢骨高强混凝土组合构件的抗弯性能,采用抗弯试验研究方法和统一理论的计算方法,对工字形钢骨的钢管钢骨高强混凝土构件进行了抗弯的理论和试验研究.试验主要参数为配骨指标(ρ=0.3~0.6)和钢骨的不同加载方向(强轴和弱轴).试验表明:极限弯矩值随配骨指标的增加呈非线性增长,当配骨指标一定时,极限弯矩值随惯性矩的增加按比例增加,弱轴跨中变形大于强轴;组合构件符合平截面假定,挠度曲线符合正弦半波分布;钢管和钢骨对混凝土的紧箍作用强轴高于弱轴,且随配骨指标的减小而增加.在试验分析的基础上,建立组合构件抗弯承载力计算公式,计算结果与试验结果吻合良好.
关键词:  钢管  钢骨高强混凝土  抗弯承载力  配骨指标  加载方向
DOI:10.11918/j.issn.0367-6234.2010.10.028
分类号:TU398.9
基金项目:辽宁省自然科学基金项目(20092044);辽宁省教育厅科技攻关项目(2008468)
Flexural members of steel tube filled with steel-reinforced high-strength concrete
LIU Xiao1,2, WANG Lian-guang1, WANG Bing2
1.School of Resources & Civil Engineering,Northeastern University,Shenyang 110004,China;2.School of Architectural and Civil Engineering,Shenyang University,Shenyang 110044,China)
Abstract:
In order to study the flexural performance of members of steel tube filled with steel-reinforced highstrength concrete (STFSC),experimental and theoretical researches on the flexural behavior of 5 I shape of STFSC were carried out.The parameters in the study include the steel-reinforced index ρ=0.3-0.6 and different loading directions of steel-reinforce.The results indicate that bearing capacity of composite member nonlinearly increases with the increase of steel-reinforced index,but it linearly increases with the moment of inertia and the deformation of minor axis is bigger than that of major axis when the steel-reinforced index is determined.Composite member accords with plane section assumption,and the deflection of member fits for sine curve.The major axis of confining force of steel tube and steel-reinforce to concrete is more obvious than its minor axis,and the confining force is increased with the decrease of steel-reinforced index.Based on the experimental analysis,formula of bearing capacity of flexure is built,and a good agreement is obtained between calculating results and experimental results.
Key words:  steel tube  steel-reinforced high-strength concrete  bearing capacity of flexure  steel-reinforced index  loading direction

友情链接LINKS