期刊检索

  • 2024年第56卷
  • 2023年第55卷
  • 2022年第54卷
  • 2021年第53卷
  • 2020年第52卷
  • 2019年第51卷
  • 2018年第50卷
  • 2017年第49卷
  • 2016年第48卷
  • 2015年第47卷
  • 2014年第46卷
  • 2013年第45卷
  • 2012年第44卷
  • 2011年第43卷
  • 2010年第42卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 哈尔滨工业大学 主编 李隆球 国际刊号ISSN 0367-6234 国内刊号CN 23-1235/T

期刊网站二维码
微信公众号二维码
引用本文:赵勃,李满天,孙立宁.双偏心块驱动球形机器人原地转向运动控制[J].哈尔滨工业大学学报,2011,43(11):49.DOI:10.11918/j.issn.0367-6234.2011.11.011
.Turning in place motion control of two pendulums driven spherical robot[J].Journal of Harbin Institute of Technology,2011,43(11):49.DOI:10.11918/j.issn.0367-6234.2011.11.011
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
过刊浏览    高级检索
本文已被:浏览 1607次   下载 1402 本文二维码信息
码上扫一扫!
分享到: 微信 更多
双偏心块驱动球形机器人原地转向运动控制
赵勃, 李满天, 孙立宁
哈尔滨工业大学机器人技术与系统国家重点实验室
摘要:
为了提高球形机器人的运动性能,将原地转向运动作为一种独立的运动方式,研究了一种双偏心质量块驱动球形机器人的原地转向运动控制方法.介绍了双偏心质量块驱动球形机器人的机构特点,利用达朗伯原理对机器人进行受力分析,阐述了双偏心质量块驱动球形机器人原地转向运动原理,建立了机器人的原地转向动力学模型.将原地转向运动分为起始、粘滞、滑移3个阶段,提出了一种基于粘滑原理的球形机器人原地转向控制方法,并通过仿真和样机实验验证了控制方法的有效性.
关键词:  球形机器人  双偏心质量块  原地转向  粘滑原理
DOI:10.11918/j.issn.0367-6234.2011.11.011
分类号:TP242
基金项目:长江学者创新团队计划(IRT0423)
Turning in place motion control of two pendulums driven spherical robot
ZHAO Bo,LI Man-tian,SUN Li-nin(State Key Laboratory of Robotics and System,Harbin Institute of Technology,150001 Harbin,China
Abstract:
Considering the turning in place motion as an independent motion which can enhance the mobility of spherical robot,a turning in place motion control method of two pendulums driven spherical robot is studied.First,the mechanism characteristics of two pendulums driven spherical robot are introduced,and then the force condition of turning in place motion is analyzed based on D’alembert’s principle and the motion principle of turning in place motion of two pendulums driven spherical robot is discussed,finally,the dynamic model of turning in place motion is constructed.The whole process of turning in place motion is divided into three stages which are startup stage,stick stage and slip stage respectively,and a stick-slip principle for turning in place motion control is proposed.The effectiveness of the control method is validated by both simulation and prototype experiment.
Key words:  spherical robot  two pendulums  turning in place  stick-slip principle

友情链接LINKS