期刊检索

  • 2024年第56卷
  • 2023年第55卷
  • 2022年第54卷
  • 2021年第53卷
  • 2020年第52卷
  • 2019年第51卷
  • 2018年第50卷
  • 2017年第49卷
  • 2016年第48卷
  • 2015年第47卷
  • 2014年第46卷
  • 2013年第45卷
  • 2012年第44卷
  • 2011年第43卷
  • 2010年第42卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 哈尔滨工业大学 主编 李隆球 国际刊号ISSN 0367-6234 国内刊号CN 23-1235/T

期刊网站二维码
微信公众号二维码
引用本文:蒙静,张钦宇,张乃通,张霆廷,马琳.IR-UWB穿墙测距误差研究[J].哈尔滨工业大学学报,2011,43(11):84.DOI:10.11918/j.issn.0367-6234.2011.11.018
MENG Jing,ZHANG Qin-yu,ZHANG Nai-tong,ZHANG Ting-ting,MA Lin.Research on IR-UWB through wall ranging error[J].Journal of Harbin Institute of Technology,2011,43(11):84.DOI:10.11918/j.issn.0367-6234.2011.11.018
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
过刊浏览    高级检索
本文已被:浏览 2126次   下载 1307 本文二维码信息
码上扫一扫!
分享到: 微信 更多
IR-UWB穿墙测距误差研究
蒙静1, 张钦宇1, 张乃通1,2, 张霆廷1, 马琳2
1.哈尔滨工业大学深圳研究生院;2.哈尔滨工业大学电子与信息工程学院
摘要:
通过将IR-UWB穿墙测距NLOS误差建模为由空间结构导致的几何距离误差和脉冲信号波形失真导致的峰值偏移误差.依据高频射线理论推导了基于收发节点距离和墙体参数的几何距离误差限.通过对IR-UWB信号穿墙透射机理的建模,研究了频率依赖性导致的波形失真问题及相应的TOA测距误差.仿真结果表明,几何距离误差主要由墙体障碍物参数决定,受收发节点间距离的影响不大;IR-UWB信号穿墙传播会发生波形畸变,墙体的非均匀性和相对介电常数越大,波形畸变越严重,由此导致的TOA相关峰值偏移误差维持在脉冲信号距离分辨率范围内.
关键词:  测距误差  IR-UWB  穿墙传播  波形失真
DOI:10.11918/j.issn.0367-6234.2011.11.018
分类号:TN925
基金项目:国家自然科学基金资助项目(60702034)
Research on IR-UWB through wall ranging error
MENG Jing1, ZHANG Qin-yu1, ZHANG Nai-tong1,2, ZHANG Ting-ting1, MA Lin2
1.Shenzhen Graduate School,Harbin Institute of Technology,518055 Shenzhen,China;2.School of Electronics and Information Engineering,Harbin Institute of Technology,150001 Harbin)
Abstract:
As the TOA ranging error was always corrupted by the direct path blockage and excess delay in complicated indoor environments,the NLOS ranging error due to IR-UWB through wall propagation was modeled by dividing it into two parts: the geometrical error caused by the pulse transmitted through wall,and the peak biased error caused by the pulse waveform distortion due to frequency dependence of huge bandwidth.The theoretical geometrical error bound was derived from transceiver distance,wall thickness and materials.The IR-UWB through wall propagation was modeled using sub-band method,and the peak biased errors were investigated through the waveform distortion of IR-UWB signal propagated in different wall structures.The simulation results show that the geometrical error was mainly determined by the obstacles parameters and the peak biased errors caused by IR-UWB waveform distortions were within the distance resolution of IR-UWB signal.
Key words:  ranging error  IR-UWB  through wall propagation  pulse distortion

友情链接LINKS