期刊检索

  • 2024年第56卷
  • 2023年第55卷
  • 2022年第54卷
  • 2021年第53卷
  • 2020年第52卷
  • 2019年第51卷
  • 2018年第50卷
  • 2017年第49卷
  • 2016年第48卷
  • 2015年第47卷
  • 2014年第46卷
  • 2013年第45卷
  • 2012年第44卷
  • 2011年第43卷
  • 2010年第42卷
  • 第1期
  • 第2期

主管单位 中华人民共和国
工业和信息化部
主办单位 哈尔滨工业大学 主编 李隆球 国际刊号ISSN 0367-6234 国内刊号CN 23-1235/T

期刊网站二维码
微信公众号二维码
引用本文:朱磊,樊继壮,赵杰,吴晓光,韩震峰.一种多关节履带式机器人自主越障运动规划[J].哈尔滨工业大学学报,2012,44(1):88.DOI:10.11918/j.issn.0367-6234.2012.01.017
ZHU Lei,FAN Ji-zhuang,ZHAO Jie,WU Xiao-guang,HAN Zhen-feng.Autonomous motion planning for obstacles-climbing of a multi-track robot[J].Journal of Harbin Institute of Technology,2012,44(1):88.DOI:10.11918/j.issn.0367-6234.2012.01.017
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
过刊浏览    高级检索
本文已被:浏览 2156次   下载 1344 本文二维码信息
码上扫一扫!
分享到: 微信 更多
一种多关节履带式机器人自主越障运动规划
朱磊, 樊继壮, 赵杰, 吴晓光, 韩震峰
哈尔滨工业大学机器人技术与系统国家重点实验室
摘要:
为提高矿难搜索机器人的自主运动能力,建立了其翻越垂直障碍的运动学模型,并且对其翻越垂直障碍的能力进行了分析,提出了一种基于嵌套人工鱼群算法的机器人自主越障运动规划方法.采用三层四组人工鱼群算法削弱4个自变量之间的耦合作用,并且利用一种快速随机搜索方法缩小关节角度的搜索范围,从而实现了满足关节角度变化最小这一优化指标的机器人越障逆运动学求解的要求.MATLAB的仿真实验证明:该方法相对传统算法可以利用更少的人工鱼数目在较少的代数内有效地得到机器人越障中每一步骤的最优关节角度值,从而为机器人的控制提供依据.利用仿真结果对机器人进行了双单元模式的自主越障运动规划实验,实验结果表明机器人能够顺利实现越障.
关键词:  多关节履带式机器人  越障运动规划  嵌套人工鱼群算法  快速随机搜索方法  关节角度
DOI:10.11918/j.issn.0367-6234.2012.01.017
分类号:TP242
基金项目:国家高技术研究发展计划重点资助项目(863-2007AA041501)
Autonomous motion planning for obstacles-climbing of a multi-track robot
ZHU Lei, FAN Ji-zhuang, ZHAO Jie, WU Xiao-guang, HAN Zhen-feng
State Key Laboratory of Robotics and System,Harbin Institute of Technology,150001 Harbin,China
Abstract:
To improve the autonomous ability,the obstacles-climbing module of a searching robot under mine disasters is built.Based on the model,the ability of obstacles-climbing robot is analyzed and an nested artificial fish-swarm algorithm(NAFSA) is developed to solve the automatic motion planning of the robot.The method adopts the AFAS in three layers of four groups which can weaken the coupling of the four variables,and uses the rapidly random exploring method for reducing the variables bounds to meet with the minimum changes of joint angles.Then,simulations in MATLAB show that this method can get the key joint angles more effectively and in less intervals than traditional method,and provide reference for the robot control.Finally,the obstacle-climbing experiment of double units mode is carried out,and the simulation result verifies that the robot can climb over the obstacle.
Key words:  multi tracked robot  obstacles-climbing motion planning  nested artificial fish-sarm agorithm(NAFSA)  rpid random exploring method  joint angles

友情链接LINKS