| 引用本文: | 黄瑞,张树生,陶俊,范海涛.一种前驱三维工序模型与工序图关联方法[J].哈尔滨工业大学学报,2012,44(3):102.DOI:10.11918/j.issn.0367-6234.2012.03.020 |
| HUANG Rui,ZHANG Shu-sheng,TAO Jun,FAN Hai-tao.An association method of precursory 3D process modeland process drawing[J].Journal of Harbin Institute of Technology,2012,44(3):102.DOI:10.11918/j.issn.0367-6234.2012.03.020 |
|
| 摘要: |
| 针对三维工序模型重建需解决前驱三维工序模型与工序图关联问题,提出一种基于图元组合单元的属性邻接图前驱三维工序模型与工序图关联方法．提取工序图与前驱三维工序模型投影图的图元组合单元信息,将工序图与投影图用属性邻接图来表示,根据图元组合单元顶点与边的属性信息判断两个属性邻接图是否同构,将前驱三维工序模型与工序图关联问题转化为属性邻接图的映射匹配问题．以侧板类零件为例进行实例验证,结果表明,该方法能够实现前驱三维工序模型与工序图关联． |
| 关键词: 工序图；工序模型 三维重建 子图同构 |
| DOI：10.11918/j.issn.0367-6234.2012.03.020 |
| 分类号:TG302 |
| 基金项目:国家自然科学基金资助项目(51075336);国家高技术研究发展计划资助项目(863-2007AA04Z137). |
|
| An association method of precursory 3D process modeland process drawing |
|
HUANG Rui,ZHANG Shu-sheng,TAO Jun,FAN Hai-tao
|
| Abstract: |
| Three-dimensional (3D) model reconstruction needs to resolve the association problem of precursory 3D process model and process drawing. An approach based on the attribute adjacency graph of the primitive combination units is proposed. By extracting the primitive combination units of process drawing and the projection drawings of the precursory 3D process model, the process drawing and the projection drawings was presented in an attribute adjacency graph. According to the attributes of the vertexes and edges, whether the two attribute adjacency graphs were isomorphism were judged, and the association problem of precursory 3D process model and process drawing was translated to the matching problem of attribute adjacency graphs. Taking the side plate part as an example, the experimental result shows that this method realizes the association of precursory 3D process model and process drawing. |
| Key words: process drawing process model three-dimensional model reconstruction subgraph isomorphism |
