| 引用本文: | 杨镇,田玉滨,陈省吾,万宗帅,周鹏.钢筋与水泥基材料粘结性能的超声波评估方法[J].哈尔滨工业大学学报,2015,47(6):99.DOI:10.11918/j.issn.0367-6234.2015.06.018 |
| YANG Zhen,TIAN Yubin,CHEN Shengwu,WAN Zongshua,ZHOU Peng.Ultrasonic assessment methods on bonding level of rebar and cement-based material[J].Journal of Harbin Institute of Technology,2015,47(6):99.DOI:10.11918/j.issn.0367-6234.2015.06.018 |
|
| 本文已被：浏览 1952次 下载 1189次 |
码上扫一扫！ |
|
|
| 钢筋与水泥基材料粘结性能的超声波评估方法 |
|
杨镇1,2, 田玉滨1,2, 陈省吾2, 万宗帅2, 周鹏2
|
|
(1.结构工程灾变与控制教育部重点实验室(哈尔滨工业大学),150090 哈尔滨; 2.哈尔滨工业大学 土木工程学院, 150090 哈尔滨)
|
|
| 摘要: |
| 为考虑钢筋与一种水泥基材料(HCTM砂浆)之间粘结缺陷与力学性能的内在规律,利用超声波检测技术,考虑钢筋表面形式,粘结不良处初始缺陷程度等参数,建立了超声波参数与初始缺陷参数间的相关关系;通过静力拔出试验,分析了拔出力与锚固界面、钢筋表面等因素之间的关系;并利用三维有限元程序ANSYS进行了数值仿真,将分析结果与实验结果进行对比．结果表明,试验结果与理论分析结果有较强的一致性． |
| 关键词: 钢筋 水泥基材料 粘结程度 超声波检测 拉拔试验 数值仿真 |
| DOI：10.11918/j.issn.0367-6234.2015.06.018 |
| 分类号:TU399 |
| 基金项目: |
|
| Ultrasonic assessment methods on bonding level of rebar and cement-based material |
|
YANG Zhen1,TIAN Yubin1,2,CHEN Shengwu1,WAN Zongshua1,ZHOU Peng1
|
|
(1. Key Lab of Structures Dynamic Behavior and Control (Harbin Institute of Technology), Ministry of Education, 150090 Harbin, China; 2. School of Civil Engineering, Harbin Institute of Technology, 150090 Harbin, China)
|
| Abstract: |
| To study the inherent law of bonding defects and mechanical properties between steel and cement-based materials, considering parameters of the form of rebar surface, the initial bonding defect level, the relationship between ultrasonic parameters and the initial defect was established by ultrasonic detection technology. Furthermore, static pull-out test were carried out to get the relationship between pullout force and factors including anchoring interface, steel surface. Three-dimensional finite element program ANSYS were used to conduct numerical simulation. The theoretical analysis results were compared with the experimental results. The results indicate that the results of theoretical analysis and the result has good agreement. |
| Key words: rebar cement-based material bonding degree ultrasonic inspection pull-out test numerical simulation |
